Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
How many different machines can I hook up to this unit? You can run four simultaneously that require up to 1,205 CFM each.
How big are the bottom bags? 26 cubic feet.
What micron bag comes with this machine? 1 Micron.
Are there lower micron replacement bags available, other than the plastic ones? No.
What is the overall size of this unit? 55” Wide X 49” Deep X 130” Tall.
What is the best way to install a ground wire on my system? It is best to have a bare copper wire running through the inside of the hose, connecting one end to the dust collector and the other end to the machine being used. Also, have a separate wire spiraled around the inside of the hose every 6 to 8 inches. Refer to the G2525 Dust Collection book for more information.
I will be flowing dust and chips into a hopper so I won’t be needing the bags on my dust collector? Can I purchase the machine without them? No, the machine is sold as a complete unit only.
Can I use this to exhaust smoke and fine floating dust from my shop? A dust collector is not designed and would not work well for this application. The suction is limited to a small area around the hose opening.
Does it restrict air flow if I put a smaller micron bag on this unit? Very little, if any. Even though a smaller micron bag has smaller openings, there are more of them per square inch, which allows for airflow.