Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.

1. Can I put a metal cutting bade on this saw?
   No. This saw runs too fast for cutting metal.
2. Can this machine be wired for 110V?
   No. The motor and switch are 220V only.
3. Why are the upper and lower blade guides different?
   Due to space restrictions and to make guide adjustments easy, European style roller guides are used under the table.
4. ls an extension block kit available for this machine?
   No. This machine has a one-piece formed steel body.
5. What's the difference between the skip, hook and raker toothed blades?
   Skip tooth blades have widely spaced teeth to prevent clogging. This is good for straight cuts like ripping. Hook tooth blades have 10' rake angle which causes the blade to cut more aggressively. This type of blade cleans out fast and is best for resawing. Raker tooth blades have teeth that are offset to the left and right. This blade is best for cutting circles and contours.

Please feel to reach out to us HERE if you have any questions about this machine or need additional support.