Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
Can I put a metal cutting blade on this saw?
No. This saw runs too fast for cutting metal.
Can this machine be wired for 110V?
No. The motor and switch are 220V only.
Why are the upper and lower blade guides different?
Due to space restrictions and to make guide adjustments easy, European style roller guides are used under the table.
Is an extension block kit available for this machine?
No. This machine has a one-piece formed steel body.
What is the cutting capacity of this bandsaw?
The G7211 can cut up to 24" to the left of the blade and has an overall height capacity of 14". The height capacity at the blade is 15 3⁄4".
What are the table specifications?
The table is precision ground cast iron, measuring 21 1⁄4" x 26", and tilts 45° right and 10° left.
What type of wheels and guides does the saw use?
The wheels are fully balanced cast iron with rubber tires. All blade guides are ball bearing and micro-adjustable.
What kind of motor does the G7211 have?
The saw uses a TEFC capacitor start induction motor with shielded and lubricated ball bearings, a magnetic switch, and thermal overload protection. The G7211 model is 5 HP, single-phase, 220V, 60 Hz, drawing 20 amps at 3450 RPM.
What blade sizes and speeds are supported?
The saw accepts blades from 1 1⁄2" to 1 1⁄4" and uses a standard 176 3⁄4" blade length. Blade speeds are 2800 and 3500 FPM.
What additional features does this bandsaw include?
The G7211 comes with a cast iron fence, miter gauge, 4" dust port, and a foot brake for added control and safety.
How much space do I need to install this bandsaw?
The machine’s footprint is 35" x 19 1⁄2". Including the fence, the depth is 29", and the overall width is 40". Allow extra space around the saw for material handling and maintenance.
What is the weight of the machine?
The G7211 weighs 725 lbs. It ships in a crate measuring 39" L x 27 1⁄2" W x 87" H.
Can this saw be used in a commercial or industrial setting?
Yes. With its 5 HP motor, fully ball bearing guides, and heavy-duty construction, it is suitable for demanding woodworking shops.
Does this bandsaw support dust collection?
Yes. It includes a 4" dust port that can be connected to a dust collection system.
Is maintenance required on the blade guides or wheels?
The guides are all ball bearing and micro-adjustable. Periodic inspection and lubrication are recommended to ensure smooth operation.
Can this saw cut very thick or wide material?
Yes. It can handle material up to 24" to the left of the blade and up to 14" high. Make sure your workpiece fits within these dimensions.