Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
1. What are the power requirements for the G4006 Bandsaw?
The G4006 operates on 110V or 220V, single-phase, 60 Hz power.
- Amps: 22A at 110V / 11A at 220V
- Minimum circuit size: 30A at 110V / 15A at 220V
It includes a 4 ft., 14 AWG power cord, but a plug is not included.
2. What type of switch does it have?
The G4006 uses a simple on/off switch for straightforward operation.
3. What type of motor does the G4006 have?
The bandsaw is powered by a 1.5 HP TEFC capacitor-start induction motor with belt drive power transfer for smooth and reliable cutting.
4. Are the bearings maintenance-free?
Yes. All bearings are shielded and permanently lubricated for long life and low maintenance.
5. What are the blade speeds?
The G4006 offers variable blade speeds from 55 to 283 FPM, adjustable via a centralized control panel on top of the saw bow.
6. What is the maximum cutting capacity?
At 90°:
- Rectangular: 9-1/2" high × 18" wide
- Round: 10" diameter
At 45°:
- Rectangular: 10" high × 11" wide
- Round: 10" diameter
At 60°:
- Rectangular: 4" high × 8-1/2" wide
- Round: 8" diameter
7. Does the head swivel for angled cuts?
Yes. The saw head swivels left 45° and right 60° for precise angle cutting without moving the workpiece.
8. What type of vise does it have?
The G4006 includes a quick-positioning vise with a 7-1/2" jaw depth and 5" jaw height, adjustable for accurate clamping.
9. Does it include a coolant system?
Yes. The G4006 comes with a built-in 1-liter coolant system for cutting metals efficiently.
10. What are the table dimensions and features?
- Table size: 26" long × 8" wide (precision-ground cast iron)
- Floor-to-cutting height: 23-1/4"
11. What materials are used in construction?
- Frame and wheels: Cast iron
- Base and wheel cover: Pre-formed steel
- Finish: Durable epoxy paint
12. What is the wheel size?
The upper and lower wheels are 13" in diameter.
13. What blades are compatible with the G4006?
- Blade length: 132"
- Blade guide system: Upper and lower ball bearing guides for precision cutting
14. Does it have blade tension or speed charts?
Yes. The G4006 includes a blade tension scale, blade speed chart, and tooth selection chart for optimal cutting setup.
15. What are the key features of the G4006?
- Built-in coolant system
- Adjustable hydraulic downfeed
- Automatic shutoff
- Swivel base with degree scale
- Centralized control panel
- Variable speed control
- Quick-positioning vise
- Heavy-duty all-steel one-piece base
16. Is it easy to adjust blade guides and downfeed?
Yes. Both the blade guide system and hydraulic downfeed are fully adjustable for precise cuts and consistent performance.
17. How long does assembly take?
Assembly and setup typically take about 1.5 hours.
18. Where is the G4006 manufactured?
The G4006 is manufactured in Taiwan.
19. Is it ISO certified or NRTL listed?
Yes. The G4006 is ISO 9001 certified, but it is not NRTL listed.
20. What kind of oil do I use in the gearbox?
Use 90-weight gear oil in the gearbox.
21. What type of cutting fluid should I use?
Any water-soluble oil works. Grizzly recommends H9240 heavy-duty soluble machining fluid concentrate for demanding applications.
22. What is the purpose of the swivel head?
The swivel head allows you to adjust the cutting angle without moving heavy workpieces or repositioning the saw, providing greater precision and control.