Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
1. What are the power requirements for the G1073 Bandsaw?
The G1073 operates on 110V or 220V, single-phase, 60 Hz power.
- Amps: 28A at 110V / 14A at 220V
- Minimum circuit size: 30A at 110V / 15A at 220V
It includes a 5 ft., 14 AWG power cord, but a plug is not included.
2. What type of switch does it use?
The G1073 uses an on/off toggle switch with a safety lock to prevent accidental start-up.
3. What type of motor does the G1073 have?
The bandsaw is powered by a 2 HP TEFC capacitor-start induction motor for reliable performance.
4. How is power transferred to the blade?
Power is delivered through a belt drive system, ensuring smooth and consistent cutting.
5. What are the blade speeds?
The G1073 offers three blade speeds:
- 2,275 FPM
- 2,720 FPM
- 3,265 FPM
6. Are the bearings maintenance-free?
Yes. The bearings are shielded and permanently lubricated for long life and low maintenance.
7. What is the maximum cutting capacity?
- Cutting width (throat capacity): 16-1/2"
- Resaw height: 7-3/8"
8. What blades are compatible with the G1073?
- Blade length: 113"
- Blade width range: 1/4" to 1"
9. What type of blade guides does it use?
The G1073 uses steel guide blocks with micro-adjustment capability for precise cuts.
10. Is it easy to change blades?
Yes. The G1073 features hinged wheel covers and an included wheel brush for easy blade changes and smooth operation.
11. What are the table dimensions and features?
- Table size: 17" x 17" (precision-ground cast iron)
- Table thickness: 1-5/16"
- Table tilt: 10° left and 45° right for angled cuts
12. Is the fence adjustable?
Yes. The heavy-duty extruded aluminum fence is adjustable for blade lead and locks at both the front and rear. A miter gauge is included.
13. What materials are used in construction?
- Frame and wheels: Cast iron
- Wheel covers and base: Pre-formed steel
- Wheels: Computer-balanced with rubber tires
- Finish: Powder-coated for durability
14. What is the wheel size?
The upper and lower wheels are 16-7/8" in diameter and 1-1/4" wide.
15. Does it come with a mobile base?
The G1073 is compatible with the D2058A mobile base (sold separately).
16. Does the G1073 have dust collection?
Yes. It includes a 2-1/2" dust port for connection to a shop vacuum or dust collection system.
17. How long does assembly take?
Assembly and setup typically take about 1.5 hours.
18. Where is the G1073 manufactured?
The G1073 is manufactured in Taiwan.
19. Is it ISO certified or NRTL listed?
No. This model is not ISO 9001 certified and is not NRTL listed.
20. What is the warranty?
The G1073 comes with a 1-year warranty.
21. What makes the G1073 unique?
- Heavy-duty stand to minimize vibration
- Micro-adjustable blade guides
- Heavy-duty rip fence
- Easy blade changes with hinged wheel covers
- Wheel brush for smooth operation
22. Has this bandsaw received any awards?
Yes. The G1073 has been recognized as an American Woodworker Best Buy and a Popular Woodworking Readers' Choice.