Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
1. What are the power requirements for the G1052 Bandsaw?
The G1052 runs on 110V, single-phase, 60 Hz power.
- Full-load current: 8A
- Minimum circuit size: 15A
It includes a 5 ft., 16 AWG power cord and plug for easy setup.
2. What type of switch does it use?
The G1052 features a toggle safety switch with a removable key to prevent accidental or unauthorized operation.
3. What type of motor does the G1052 have?
The bandsaw is powered by a 1/2 HP TEFC capacitor-start induction motor with:
- Gear drive for smooth power transfer
- Shielded, permanently lubricated bearings for long life
4. What is the motor speed and blade speed?
- Motor speed: 1,720 RPM
- Blade speed: Approximately 1,480 FPM
5. What is gear reduction, and why is it used?
Gear reduction transfers motor power efficiently to the blade, allowing smooth cutting at lower RPMs while maintaining cutting torque.
6. What is the maximum cutting capacity of the G1052?
- Width (throat capacity): 9-1/4"
- Resaw height: 4-1/8"
7. What blades are compatible with this bandsaw?
- Blade length: 64"
- Blade width range: 3/16" to 3/8" (up to 1/2" maximum)
8. What type of blade guides does it use?
The G1052 uses ball bearing blade guides for precise and smooth operation.
9. What are the table dimensions and features?
- Table size: 11-1/2" x 11-1/2" (machined aluminum)
- Table tilt: 15° left and 45° right for angled cuts
10. Is the fence adjustable?
Yes. The steel tube fence is double-locking and adjustable to accommodate blade lead. It locks at both the front and rear for stability.
11. What materials are used in construction?
- Frame and base: Cast iron
- Wheels: Computer-balanced cast aluminum with rubber tires
- Wheel covers: Pre-formed steel
- Finish: Powder-coated for durability
12. What is the wheel size?
The upper and lower wheels are 9-3/4" in diameter and 3/4" wide.
13. Does the G1052 have dust collection?
Yes. It includes a 2" dust port for connecting to a shop vacuum or dust collection system.
(Note: Some versions have a 1-1/2" opening in the back for vacuum connection.)
14. How long does assembly take?
Assembly and setup typically take about 30 minutes.
15. Where is the G1052 manufactured?
The G1052 is manufactured in Taiwan.
16. Is the G1052 ISO certified or NRTL listed?
No. This model is not ISO 9001 certified and is not NRTL listed.
17. What is the warranty?
The G1052 comes with a 1-year warranty.
18. What makes the G1052 unique?
- Designed using full-sized bandsaw technology
- Includes fence and miter gauge for versatility
- Gear reduction system for smoother operation and better torque
19. Has this bandsaw received any awards?
Yes. The G1052 was recognized as a Popular Woodworking Editor's Choice.
20. Can I use this bandsaw for metal cutting?
No. To cut metal, the blade speed generally needs to be 250 FPM or slower, depending on the metal. The G1052 runs at 1,480 FPM, which is too fast for metal cutting.