Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What are the overall dimensions of the G4186Z Bandsaw?
Height: 69"
Height from floor to table: 34-3/4"
Table size: 17-3/4" x 18" x 1-1/2" thick (precision-ground cast iron)
Width of unit: 32"
Depth of unit: 26-1/4"
Footprint: 25" x 16"
Shipping weight: 345 lbs.
Weight in place: 305 lbs.
What is the cutting capacity of this bandsaw?
Left of blade (throat capacity): 17-1/4"
Cutting height: 9-3/8"
Table tilt: 45° right, 10° left
What type of wheels does the G4186Z have?
The G4186Z comes with fully balanced cast iron wheels with rubber tires for smooth operation and stability.
What type of rip fence is included?
It includes a double-lock, adjustable, extruded aluminum guide fence for accurate ripping.
What kind of guides are used?
The bandsaw uses steel block guides with thrust bearings for dependable blade tracking.
What type of motor does the G4186Z Bandsaw use?
Motor type: TEFC capacitor-start induction
Horsepower: 2 HP
Phase/Cycle: Single-phase, 60 Hz
Voltage: 110V/220V (prewired for 220V)
Amps: 24A at 110V, 12A at 220V
Speed: 1720 RPM
Switch type: Push-button with paddle safety key
Bearings: Shielded and permanently lubricated ball bearings
Can this bandsaw be wired for 110V?
Yes. The motor is dual-voltage and can be rewired for 110V operation. The switch supports both voltages.
What blade sizes can this machine use?
Range of blade widths: 1/4" – 1-1/4"
Standard blade length: 130"
Blade speeds: 2000 and 3100 FPM
Can I use the G4186Z Bandsaw for resawing?
Yes, but only to a limited degree. Resawing capacity depends on the motor size, blade type, and cutting height. This model is not designed as a dedicated resaw machine.
Is an extension block kit available for this machine?
No. The G4186Z has a one-piece formed steel body, which does not support an extension block kit.
What is the difference between the G1012 Bandsaw and the G4186Z Bandsaw?
Both have 18" wheels, but throat capacities differ:
G1012: 17-5/8" throat
G4186Z: 17-1/4" throat
Speeds: G1012 has 3 speeds; G4186Z has a single-speed motor
Covers: G1012 uses removable covers; G4186Z uses hinged covers
Body: G1012 has a 2-piece cast iron body; G4186Z has a 1-piece formed steel body
Does this machine come with a miter gauge?
Yes, the G4186Z includes a miter gauge for angled cuts.
What safety features are included?
The bandsaw includes a paddle safety switch with removable key and a rack & pinion upper guide adjustment system for safe and precise blade positioning.