Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.
What are the overall dimensions of the G1758?
The crate size is 49" L x 18" W x 38½" H. The table measures 9½" x 9½". The machine length is 48", width (front to back) is 16", overall height is 40", and floor-to-cutting-area height is 22". The shipping weight is 330 lbs, and net weight is 292 lbs. The footprint is 32" x 12½".
What are the cutting capacities?
The maximum cutting capacity for round stock is 7" in diameter, and for rectangular stock it is 7" x 12". The fixed vise jaw measures 4" x 10", the coolant pump holds 1½ gallons, and the vise capacity is a 10" opening.
What is the construction of the machine?
The main body is cast iron, band support arms are cast aluminum, and the stand is stamped steel. Wheels have ball bearings in the top and bottom. The gear box is sealed and uses a lubricated worm gear. Blade guides use ball bearings. Power is transferred via belt drive.
What are the blade specifications?
Blade speeds are 85, 130, 180, and 235 FPM. The blade size is ¾" x 93".
What type of motor does the G1758 use?
It has a TEFC capacitor-start induction motor with 1 HP. It is single-phase 60 Hz, prewired for 110V but can also run on 220V. The amperage is 12/6A, and it runs at 1720 RPM. Bearings are shielded and lubricated for life. The motor has an automatic shut-off switch.
What features does the machine include?
The bandsaw includes coolant capacity, hydraulic feed control, and a quick positioning vise.
What kind of oil do I use in the gear box?
The gear box requires 90 weight gear oil.
What type of cutting fluid should I use?
Any type of water-soluble oil will work. Grizzly offers H9240 heavy-duty soluble machining fluid concentrate for heavy-duty applications.
How do you change speeds on this machine?
This machine has a four-step pulley and V-belt system. To change speeds, the motor is unlocked and pivoted to release belt tension, then the belt is moved to the desired pulley step.
Will this machine do angle cuts?
Yes. The vise can be adjusted between 45° and 90°.
What kind of down-feed mechanism does this machine have?
It uses an adjustable hydraulic cylinder to control the down-feed rate.