Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.

1. What are the key features of the G1012 Bandsaw?

The G1012 includes:

• Precision-ground cast iron table for stability
• Fully balanced cast aluminum wheels with rubber tires
• Double-lock rip fence for accurate cuts
• Pre-formed steel wheel covers for safety
• Steel block blade guides with ball bearing support
• TEFC capacitor-start induction motor
• Variable blade speeds for versatility
• Tilt capability for angled cuts

2. What are the overall dimensions of the G1012?

• Height from floor to table: 38"
• Overall height: 31" (assembled height varies with configuration)
• Overall width: 33"
• Overall depth: 26"
• Footprint: 24" x 20"

3. What is the size of the table?

The table measures approximately 18" x 18" with a thickness of 4-1/2", providing a stable surface for workpiece support.

4. What is the shipping weight and crate size?

• Shipping weight: 350 lbs
• Crate size: 18" x 26" x 60"

5. How much space do I need to install this bandsaw?

Plan for a 24" x 20" footprint, plus 3–4 feet of clearance on all sides for safe operation and material handling.

6. What is the cutting capacity of the G1012?

• Maximum cut to the left of the blade (throat capacity): 17"
• Maximum height of cut (resaw capacity): 10"
• Table tilt: 5° left to 45° right

7. What blade sizes and speeds are supported?

• Blade width range: 1/16" to 1"
• Blade speeds: 2100, 2600, and 3150 FPM
• Arbor size: 5/8"

8. Can this bandsaw cut metal or only wood?

The G1012 is not designed for cutting metal. To cut metal, the blade speed generally needs to be 250 feet per minute or slower, depending on the type of metal. The G1012’s blade speeds are 2100, 2600, and 3150 FPM, which are too fast for metal cutting.

9. How do I adjust the tilt for angled cuts?

The table tilts from 5° left to 45° right. Use the adjustment mechanism under the table, lock it securely, and verify with a protractor for precision.

10. What materials is the G1012 made from?

• Table: Precision-ground cast iron
• Body: Fully balanced cast aluminum with rubber tires
• Rip fence: Double-lock extruded aluminum
• Wheel covers: Pre-formed steel
• Blade guides: Steel blocks with ball bearing support

11. Is the G1012 stable and vibration-free?

Yes. The cast iron table and balanced aluminum body minimize vibration. Shielded, permanently lubricated bearings ensure smooth operation.

12. What type of motor does this bandsaw have?

The G1012 features a TEFC capacitor-start induction motor, rated at 2 HP, single-phase, 60 Hz.

13. What are the power requirements?

• Voltage: Dual 110/220V (prewired for 110V)
• Amps: 20A at 110V / 10A at 220V
• Switch: Magnetic with thermal overload protection

14. Does the motor have safety features?

Yes. It includes thermal overload protection and a magnetic switch that prevents accidental restarts after power loss.

15. What is the motor speed?

The motor runs at 3450 RPM, which translates to the variable blade speeds depending on pulley configuration.

16. What accessories are included with the G1012?

The package includes:

• Fence
• Miter gauge
• 1" blade

17. What type of bandsaw wheels does this machine have?

The G1012 uses cast aluminum wheels with rubber tires.

18. Can this machine be wired for 110V?

Yes, but the 220V magnetic switch must be replaced with one suitable for 110V.

19. Is the slow speed for metal cutting?

No. The slowest speed is 2100 FPM, which is too fast for most metals. Metal cutting typically requires 250 FPM or slower.