General Information
What does the G0634X combine into one machine?
The G0634X combines a 12" jointer and planer in a single space-saving design. This allows you to joint and plane boards without needing two separate machines, saving both space and setup time.
What type of cutterhead does this machine use?
This model features a V-helical cutterhead with 48 indexable carbide inserts. Each insert has four cutting edges that can be rotated as needed for a fresh, sharp edge.
What are the benefits of the helical cutterhead?
The helical cutterhead provides a smoother finish, quieter operation, and longer blade life compared to traditional straight-knife cutterheads. It also reduces tear-out on figured or difficult grain patterns.
Is it difficult to switch between jointer and planer functions?
No. The conversion process is designed for quick operation. Simply remove the quick-release fence, flip up the jointer tables, and you’re ready to use the planer. To switch back, lower the tables and reinstall the fence.
Electrical and Power Requirements
What power supply does the G0634X require?
The machine runs on 220V, single-phase, 60 Hz power. It comes prewired for 220V and does not include a plug.
What plug type should I use?
We recommend using a NEMA L6-30 plug, such as Grizzly part number T28429, to match the machine’s 30A circuit requirement.
What is the recommended circuit size?
A dedicated 30-amp circuit is recommended for safe operation.
Does the machine come with a power cord and plug?
The G0634X includes a 10-foot, 12 AWG power cord, but the plug is not included so you can install the correct style for your setup.
Cutting and Capacity
What is the maximum planing and jointing width?
Both the planer and jointer functions can handle stock up to 12 inches wide.
What is the maximum depth of cut?
The planer can take up to a 1/8" depth of cut per pass, and the jointer can remove up to 1/8" per pass as well.
What is the floor-to-table height?
The working table height is approximately 35-1/2" from the floor.
What is the feed speed for the planer?
The feed rate is optimized for smooth finish results and efficient stock removal, with dual feed rollers guiding the workpiece through.
Fence and Table Features
What is the fence made of?
The G0634X features a quick-release aluminum fence that can be positioned anywhere between 45° and 90°, as shown on the built-in tilt scale.
Is the fence adjustable or removable?
Yes. The fence is both adjustable and removable. It can be repositioned for angled cuts or quickly removed for planing operations.
Do you offer table extensions for a longer jointer bed?
No, we do not offer table extensions for this model. The included cast-iron tables are precision-ground for accuracy and stability.
Can I add the fence angle scale from this model to the G0634Z?
No. The fence mounting systems differ between the G0634Z and G0634X models, so the fence and scale cannot be interchanged or upgraded between the two.
Dust Collection
Does the G0634X require two dust collection hoses?
No. Only one dust port is used at a time.
Jointer mode: Use the dust port on the right side beneath the table.
Planer mode: Use the dust port on the left side of the table.
What size are the dust ports?
Each dust port is 4" in diameter, compatible with standard dust collection hoses.
Can one hose be switched between the planer and jointer ports?
Yes. You can easily move a single 4" hose between the two ports depending on which mode you’re using.
Shipping and Setup
How is the G0634X shipped?
This machine ships on a pallet, securely crated for freight delivery.
How can I unload it without a forklift?
Liftgate service is available for this model. This option lowers the crate safely to the ground from the freight truck. You can request this during checkout or through our Support Center.
How long does shipping take after purchase?
Delivery time varies based on your location. Estimated delivery times are displayed during checkout for accuracy.
How long does assembly take?
Assembly and setup usually take about 1–2 hours, depending on experience and available equipment.
Additional Information
What kind of motor does this machine have?
The G0634X uses a powerful 5 HP, single-phase, TEFC capacitor-start induction motor running at 3450 RPM for consistent performance.
Where is the machine manufactured?
This model is manufactured in an ISO 9001-certified factory in Taiwan.
What kind of warranty does it include?
The G0634X includes a 1-year warranty covering defects in materials and workmanship.