General & Model Information
What are the main features of the G0994?
The G0994 is a small-footprint metal-cutting bandsaw designed for home workshops and small businesses. Key features include:
Variable blade speed with DRO (85–265 FPM)
Precision-ground cast-iron table, tilting 0–45°
Quick-release two-position fence for thin or thick stock
Quick-release blade tension for fast adjustment and replacement
Rack-and-pinion guidepost attachment for smooth, precise blade guide adjustments
Ball-bearing blade guides for improved stability and blade life
LED work light and laser guide for precision cutting
Miter gauge for repeatable cuts
Compact footprint with included stand
What is the origin and warranty of this bandsaw?
Country of Origin: China
Warranty: 1 year from date of purchase
How long does it take to assemble and set up?
Approximately 30 minutes.
Electrical & Motor
What voltage and circuit are required?
Voltage: 120V, single-phase, 60 Hz
Full-load current: 4.5A
Minimum circuit size: 15A
Does the bandsaw have a safety switch?
Yes, it includes a paddle safety switch with removable key.
What are the motor specifications?
Horsepower: 3/4 HP
Speed: 900–2800 RPM
Type: Brush DC
Power transfer: Chain drive
Bearings: Sealed and permanently lubricated
Blade & Cutter Information
What blade comes with the saw?
The G0994 comes with a 72" x 3/8" 14 TPI blade.
What is the blade length and width range?
Blade length: 71-1/2" to 72-1/2"
Blade width: 3/8" – 1/2"
Can this machine cut high carbon steel?
Yes, with the proper blade and speed combination. It will not cut hardened steel.
Can this saw be used for wood or other materials?
Wood: No, the machine runs at much lower speeds (85–265 FPM) than required for wood (typically 1,520–2,620 FPM).
Other materials (plastics, bone, etc.): Not recommended, as the saw is designed specifically for metal cutting.
Can this machine cut 1/2” thick cold-rolled steel?
Yes, with the proper blade and speed settings. Contact Product Support for specific recommendations.
What is the best speed for cutting 1/4” steel?
Speed depends on blade type, material, and thickness. Refer to page 33 of the product manual for recommended speeds.
Table & Fence
What are the table specifications?
Length: 14-3/16"
Width: 12-5/8"
Thickness: 1"
Tilt: Right 0–45°, manually adjustable
Floor-to-table height: 36-1/2"
Is a fence included?
Yes, the G0994 includes a quick-release two-position fence for thin and thick stock.
Is a miter gauge included?
Yes, a metal miter gauge is included.
Operation & Performance
What is the maximum cutting width and height?
Max cutting width (left of blade): 9-5/8"
Max cutting width with fence: 6-1/8"
Max cutting height: 6"
Does the saw have variable speed?
Yes, adjustable between 85–265 FPM, allowing for longer blade life and better control depending on material.
How do the laser guide and LED work light help?
They provide precision cutting alignment and improved visibility during operation.
Can the stand be removed?
No, the included stand is integral to the machine setup.
Dust Collection & Workshop Setup
Does the G0994 have a dust collection system?
Yes, it includes a dust tray below the cutting area to collect metal particles.
What are the best practices for cutting metal safely?
Use the correct blade type and speed for your material
Ensure the blade is properly tensioned
Use personal protective equipment (gloves, safety glasses)
Keep the work area clean, using the dust tray and proper ventilation
Warranty & Accessories
What accessories are included?
72" x 3/8" 14 TPI blade
Metal miter gauge
Stand