General & Model Information
What are the main differences between the G0454Z and G0454ZX?
The differences are:
Motor: G0454Z = 5 HP, 3450 RPM; G0454ZX = 5 HP, 3450 RPM
Full-load amps: G0454Z = 19A; G0454ZX = 22A
Circuit size: Both = 30A
Maximum cut depth (full width): Both = 1/16"
Cuts per inch: G0454Z = 104 & 83; G0454ZX = 108 & 81
Cuts per minute: G0454Z = 20,000; G0454ZX = 19,608
Feed rates: G0454Z = 16 & 20 FPM; G0454ZX = 15 & 20 FPM
Floor-to-table height: G0454Z = 26-1/2 – 34-1/2"; G0454ZX = 26-1/2 – 35-1/4"
Table / Headstock Elevation: G0454Z = 8"; G0454ZX = 8-3/4"
ISO 9001 Certified: G0454Z = No; G0454ZX = Yes
Finish: G0454Z = Green & Putty Powder Coat; G0454ZX = Enamel
What cutterhead type do these planers use?
Both models feature a 4-row spiral cutterhead with 98 indexable carbide inserts (14 mm × 14 mm × 2 mm).
Can these planers handle large stock?
Yes, both can plane stock up to 20" wide, 8" thick, and minimum length of 8".
Do these planers include mobile bases?
Yes, both feature a built-in mobile base for easy relocation.
Electrical & Motor
What voltage do these planers require?
G0454Z: 240V, single-phase
G0454ZX: 220V, single-phase
Do the planers have overload protection?
Yes, both models include magnetic switch protection to prevent motor overload.
What are the motor specifications for each model?
G0454Z: 5 HP, 3450 RPM, 19A
G0454ZX: 5 HP, 3450 RPM, 22A
Cutterhead & Inserts
Are the cutterhead inserts indexable?
Yes, both models have 98 indexable carbide inserts.
What size are the replacement inserts?
14 mm × 14 mm × 2 mm.
Do the inserts need sharpening?
No; each insert can be rotated up to three times for a fresh cutting edge.
How long do the carbide inserts last?
Life depends on wood species, feed rate, and usage, but each insert can be rotated three times.
What is the difference between a spiral and a helical cutterhead?
Spiral cutterhead inserts are positioned at 90° to the workpiece, producing perpendicular cuts. Helical cutterheads have inserts angled, producing diagonal cuts.
Operation & Performance
What is the maximum stock width and thickness?
Maximum width: 20"
Maximum thickness: 8"
What is the minimum stock length and thickness?
Minimum length: 8"
Minimum thickness: 3/16"
What are the feed rates and cuts per inch?
G0454Z: 16 & 20 FPM, 104 & 83 cuts per inch
G0454ZX: 15 & 20 FPM, 108 & 81 cuts per inch
What is the maximum cut depth per pass?
Both: 1/16" full width; 1/8" on 6" wide boards
Does the table or headstock move for height adjustment?
The table moves on both models; the headstock remains fixed.
Can the infeed and outfeed tables be removed for storage?
No, removing the tables requires significant effort and carries a risk of damage.
Are the infeed and outfeed rollers adjustable?
Yes, both models have adjustable rollers to accommodate different stock thicknesses.
Can this planer be used without dust collection?
While possible, chips and debris may fall back onto the stock, affecting the finish. A dust collection system is strongly recommended.
Will this machine plane rough, chainsaw-cut wood or live-edge slabs?
No; inconsistent surfaces like live edges cannot be safely or reliably run through the planer. Consider a router sled or CNC for that process.
Dust Collection
What size dust port is on these planers?
Both have a 5" dust port.
What CFM is recommended for dust collection?
A minimum of 600 CFM is recommended.
Can the dust port be moved to the other side of the machine?
No; the dust port location is fixed on the right side.
How do I prevent clogging in the dust hood?
Ensure your dust collection system meets the recommended CFM, and clear the hood regularly. Inadequate suction can cause buildup, overheating, or machine shutdown.
Workshop & Setup Considerations
Do the table wings fold up?
No, the wings do not fold but can be removed if necessary.
What are the footprint dimensions?
Base: 23-1/2" x 29-1/2"
With wings installed: 44" x 56" x 45"
How should the planer be lifted?
Use the lifting rods located in the frame beneath the table, listed as part number P0454ZX328 in the manual.
Can the planer be delivered in a smaller box truck with a lift gate?
Delivery options may be arranged; contact Customer Service for details.
How much gear oil does the gearbox require?
Type: T28042 or ISO 320 equivalent
Amount: 20 oz
Change after first 20 hours, then annually.
Warranty & Accessories
What is the factory warranty?
Both models include a 1-year warranty from the date of purchase.
What tools are included?
Hex wrenches (3, 4, 5, 6 mm) and open-end wrenches.