⚡ Electrical & Power
What voltage and amperage does the G0949G require?
The lathe operates on 110V, single-phase, 60 Hz power, drawing 15A with a recommended 20A circuit.
Does the G0949G come with a power cord and plug?
Yes, it includes a 60" 14 AWG power cord with a 5-15 plug.
What type of switch does the lathe use?
It uses START/STOP buttons for easy operation.
🪚 Motor & Spindle
What motor does the G0949G have?
It is equipped with a 1.5 HP, DC brushless motor with a two-speed gearhead, delivering variable spindle speeds.
What are the spindle speed ranges?
The lathe has two speed ranges: 100–515 RPM and 390–2000 RPM.
Does the G0949G have a tapered spindle? If so, what size?
Yes, it features a D1-4 camlock spindle with an MT#5 taper.
What is the spindle bore diameter?
The spindle bore is 1.5 inches, suitable for long shafts and rifle barrels.
What spindle accessories are included?
Included are a 6" 3-jaw universal chuck, 6" 4-jaw independent chuck with reversible jaws, a 9-3/8" faceplate, MT#5 to MT#3 adapter sleeve, and two MT#3 dead centers.
🛠️ Operation & Cutting
What is the maximum swing over the bed and cross slide?
Swing over bed: 12-5/8 in.
Swing over cross slide: 7-3/4 in.
Swing over saddle: 10-1/2 in.
What is the distance between centers?
The lathe has 34-5/8 in. between centers.
What is the maximum tool bit size?
The maximum tool bit size is 5/8 in.
How many longitudinal and cross feeds are available?
12 longitudinal feeds: 0.0025–0.012 in./rev
10 cross feeds: 0.0015–0.0056 in./rev
How many inch and metric threads can this lathe cut?
Inch threads: 21, 8–56 TPI
Metric threads: 12, 0.4–3.5 mm
Does the lathe include a quick-change tool post?
Yes, it comes with a 200-series quick-change tool post with two holders.
Does the G0949G have a digital spindle speed readout?
Yes, it includes a digital spindle speed readout for precise monitoring.
What is the maximum diameter of material I can turn over the cross slide?
The swing over the cross slide is 7-3/4", providing clearance for medium-sized workpieces.
What is the maximum diameter over the saddle?
The swing over the saddle is 10-1/2", allowing larger workpieces to be turned without interference.
Can this lathe cut left-hand threads?
Yes, the lathe is capable of cutting left-hand threads using the appropriate change gear configuration.
How precise is the variable speed control?
The lathe has a two-speed gearhead providing variable spindle speeds of 100–515 RPM and 390–2000 RPM, with a digital spindle speed readout for precise monitoring.
Can the lathe handle heavy metal stock like steel or brass?
Yes, the 1.5 HP DC brushless motor and robust construction make the lathe capable of cutting metals like steel, brass, and aluminum commonly used in gunsmithing and general machining.
🧰 Gunsmithing & Specialty Features
Will this lathe be strong enough to chamber rifle barrels?
Yes. The G0949G is designed for gunsmithing tasks, including rifle barrel work, using its spider mount with brass-tipped screws for outboard support.
Does the lathe come with a taper attachment?
We do not offer a specific taper attachment for this model. MT5-compatible taper attachments may be available; contact Product Support for assistance.
Does Grizzly install a DRO from the factory?
No. The recommended DRO for this lathe is T33008, which must be installed separately.
Are the ways and gears hardened?
Yes. The end gears are flame-hardened steel, and the bed is induction-hardened cast iron.
How do I use the spider mount for barrel support?
The outboard spider mount has four brass-tipped screws that stabilize long shafts or rifle barrels. Position the workpiece through the spindle bore and tighten the screws evenly to hold it securely for turning operations.
Can the lathe support outboard turning for long shafts?
Yes, the combination of the D1-4 spindle, spider mount, and extended spindle length allows for turning long shafts or barrels from the outboard end.
Does the lathe come with a tailstock support for precision turning?
Yes, the lathe includes a tailstock with MT#3 taper and full travel of 3-1/8" to support workpieces and maintain precision during turning.
🛢️ Lubrication & Maintenance
What type of oil does the G0949G require?
Headstock: 27 oz. of ISO 32 (e.g., Grizzly T23963)
Gearbox: 13.5 oz. of ISO 68 (e.g., Grizzly T23962)
Apron: 6.75 oz. of ISO 68
Bedways & longitudinal leadscrew: ISO 68 as needed
Ball oilers: 1–2 squirts of ISO 32
End gears: Dab of NLGI #2 grease
How often should I lubricate the bedways and leadscrew?
The bedways and longitudinal leadscrew should be lubricated as needed with ISO 68 oil to ensure smooth operation. Ball oilers should receive 1-2 squirts of ISO 32 oil, and the end gears should be lubricated with a dab of NLGI #2 grease.
🏗️ Construction & Dimensions
What is the bed width and carriage leadscrew diameter?
Bed width: 7 in.
Carriage leadscrew diameter: 13/16 in.
What is the floor-to-center height?
The lathe has a floor-to-center height of 46-1/2 in.
What type of stand does the lathe come with?
The lathe includes a steel stand with 3 storage drawers and 1 cabinet.
Can the lathe fit on a standard workbench or does it require the included stand?
The lathe can be used on a sturdy workbench, but the included stand with storage drawers is recommended for optimal stability and workspace organization.
How heavy is the machine fully assembled?
The G0949G has a small footprint but is constructed with cast iron and steel components; shipping weight and assembled weight are not specified, but the stand adds additional stability and weight.
Can the stand be bolted to the floor for added stability?
Yes, the included stand can be bolted to the floor if desired for additional stability.
🌍 Additional Information
Can I use a DRO on this lathe?
Yes, a DRO can be installed. The recommended model for the G0949G is the Grizzly T33008.
Are metric and imperial measurements supported?
Yes, the lathe can cut both metric and inch threads, and a DRO set to millimeters can assist with metric measurements.
Does the machine come partially assembled, or is full assembly required?
The G0949G comes partially assembled, with final assembly expected to take approximately 1 hour following the included instructions.
What country is the G0949G made in?
It is manufactured in China in an ISO 9001-certified factory.
What is the warranty on this lathe?
The lathe carries a 1-year limited warranty.
Where is the serial number located?
The serial number is on the machine ID label.
What accessories are included with the G0949G?
6" 3-jaw universal chuck with two sets of jaws
6" 4-jaw independent chuck with reversible jaws
9-3/8" faceplate
200-series quick-change tool post with two holders
Steady and follow rests with brass supports
MT#5 to MT#3 adapter sleeve
Two MT#3 dead centers
Set of 10 change gears
Toolbox with service tools