Electrical & Motor Specifications

What kind of motor does the G0768 Lathe use?
It uses a 600W (3/4 HP) universal brush-type motor.

What are the electrical requirements?
The lathe requires 110V, single-phase, 60 Hz power and draws 10A at full load. A 15A circuit is recommended.

Can I plug this lathe into a standard household outlet?
Yes, it includes a 6-foot power cord with a standard 5-15 plug.

What type and size fuse does the G0768 use?
It includes a replacement fuse. For specific part numbers, refer to the manual or contact Product Support.

What kind of switch does the lathe use?
It uses an ON/OFF push-button switch with a safety cover and includes an emergency stop button.

Spindle & Speed Control

Does the G0768 have variable speed control?
Yes, it features electronic variable-speed spindle control with a digital RPM readout.

What is the spindle speed range?
The lathe offers two speed ranges: 50–1000 RPM (low) and 100–2000 RPM (high).

What type of spindle taper does it use?
The spindle taper is MT#3.

What is the spindle bore size?
The spindle bore is 0.787 inches (20mm), allowing for through-chuck operations.

What kind of bearings are used in the spindle?
The spindle uses tapered roller bearings.

What is the largest outside diameter the chuck will clamp?
The 3" chuck clamps up to 3-15/16". The 4" chuck clamps up to 2-15/16" without reversing the jaws and up to 5-3/8" with reversed jaws.

Tailstock & Tooling

What is the tailstock taper?
The tailstock taper is MT#2.

What is the tailstock quill travel?
The quill travel is 2 inches.

What is the maximum tool bit size?
The lathe accommodates tool bits up to 3/8 inches.

Does the G0768 include a DRO?
No, the G0768 does not include a digital readout (DRO). For DRO functionality, consider the G0768Z model.

Is there a compatible quick change tool post set?
Yes, the T10166 17 Pc. Quick Change Tool Post Set is compatible. This set supports tool bits up to 1/2 inches in size.

Capacity & Travel

What is the swing over bed?
8-1/4 inches.

What is the swing over cross slide?
4-5/8 inches.

What is the swing over saddle?
6-7/8 inches.

What is the distance between centers?
15-3/4 inches.

What is the cross slide travel?
3 inches.

What is the compound travel?
2-1/8 inches.

What are the longitudinal feed rates?
0.0037 and 0.0068 inches per revolution.

Does the G0768 have automatic feed?
Yes, it includes a power feed for the carriage with two longitudinal feed rates.

Threading Capabilities

What threading capabilities does the G0768 offer?
It supports 15 inch thread pitches ranging from 9–44 TPI and 12 metric thread pitches from 0.4–3.0 mm.

Can it do reverse threads?
Yes, the lathe includes reverse feed for cutting left-hand threads.

Will this thread barrels?
The G0768 can handle barrel threading, but due to its smaller size, it is not ideal for gunsmithing. A larger lathe would be better suited for that application.

Does it accept through-the-chuck stock material?
Yes, the spindle bore allows for 0.787 inches of through-chuck material.

General Information

What materials are used in construction?
The base, headstock, and bed are made of cast iron. The bed is hardened and precision-ground. End gears are steel.

What is the footprint and overall size?
Footprint: 10-1/2" x 31-1/2"
Overall dimensions: 36" W x 16" D x 14" H

What is the approximate shipping weight?
Approximately 190 lbs.

Where is the G0768 made?
This machine is manufactured in China in an ISO 9001-certified factory.

What is the warranty period?
The G0768 comes with a 1-year limited warranty.

Where is the serial number located?
The serial number is located on the ID label affixed to the machine.

Can I mount the G0768 on a stand?
Yes, it can be mounted on the optional T26599 stand or placed on a sturdy workbench.

Is the lathe certified by a nationally recognized testing laboratory (NRTL)?
No, it is not certified by an NRTL.

Included Accessories

What accessories come with the G0768?

• 4" 3-jaw scroll chuck with two sets of jaws
• 4" 4-jaw independent chuck with reversible jaws
• 6-3/4" faceplate
• 4-way turret tool post
• Steady rest and follow rest
• Tool box with service tools
• Bottle for lubrication
• Replacement fuse
• MT#2 and MT#3 dead centers