Electrical & Motor Specifications
What kind of motor does the G0768Z Lathe use?
It uses a 600W (3/4 HP) universal brush-type motor.
What are the electrical requirements?
The lathe requires 110V, single-phase, 60 Hz power and draws 10A at full load. A 15A circuit is recommended.
Can I plug this lathe into a standard household outlet?
Yes, it includes a 6-foot power cord with a standard 5-15 plug.
What type and size fuse does the G0768Z use?
It requires both the P0768906 and P0768911 fuses.
What kind of switch does the lathe use?
It uses an ON/OFF push-button switch with a safety cover and includes an emergency stop button.
Spindle & Speed Control
Does the G0768Z have variable speed control?
Yes, it features electronic variable-speed spindle control with a digital RPM readout.
What is the spindle speed range?
The lathe offers two speed ranges: 50–1000 RPM (low) and 100–2000 RPM (high).
What type of spindle taper does it use?
The spindle taper is MT#3.
What is the spindle bore size?
The spindle bore is 0.787 inches (20mm), allowing for through-chuck operations.
What kind of bearings are used in the spindle?
The spindle uses tapered roller bearings.
Tailstock & Tooling
What is the tailstock taper?
The tailstock taper is MT#2.
What is the tailstock quill travel?
The quill travel is 2 inches.
What is the maximum tool bit size?
The lathe accommodates tool bits up to 3/8 inches.
Is there a compatible quick change tool post set?
Yes, the T10166 17 Pc. Quick Change Tool Post Set is compatible. This set supports tool bits up to 1/2 inches in size.
Does the lathe include a DRO?
Yes, it includes a magnetically mounted 2-axis DRO with a resolution of 0.001".
Capacity & Travel
What is the swing over bed?
8-1/4 inches.
What is the swing over cross slide?
4-5/8 inches.
What is the swing over saddle?
6-7/8 inches.
What is the distance between centers?
15-3/4 inches.
What is the cross slide travel?
3 inches.
What is the compound travel?
2-1/8 inches.
What are the longitudinal feed rates?
0.0037 and 0.0068 inches per revolution.
Threading Capabilities
What threading capabilities does the G0768Z offer?
It supports 15 inch thread pitches ranging from 9–44 TPI and 12 metric thread pitches from 0.4–3.0 mm.
Does it accept through-the-chuck stock material?
Yes, the spindle bore allows for 0.787 inches of through-chuck material.
General Information
What materials are used in construction?
The base, headstock, and bed are made of cast iron. The bed is hardened and precision-ground. End gears are steel.
What is the footprint and overall size?
Footprint: 10-1/2" x 31-1/2"
Overall dimensions: 36" W x 16" D x 18" H
What is the approximate shipping weight?
Approximately 166 lbs.
Where is the G0768Z made?
This machine is manufactured in China in an ISO 9001-certified factory.
What is the warranty period?
The G0768Z comes with a 1-year limited warranty.
Where is the serial number located?
The serial number is located on the ID label affixed to the machine.
Can I mount the G0768Z on a stand?
Yes, it can be mounted on the optional T26599 stand or placed on a sturdy workbench.
Is the lathe certified by a nationally recognized testing laboratory (NRTL)?
No, it is not certified by an NRTL.
Included Accessories
What accessories come with the G0768Z?
- 4" 3-jaw scroll chuck with two sets of jaws
- 4" 4-jaw independent chuck with reversible jaws
- 6-3/4" faceplate
- 4-way turret tool post
- Steady rest and follow rest
- Tool box with service tools
- Bottle for lubrication
- Replacement fuse
- MT#2 and MT#3 dead centers