What is the footprint of the G0932 CNC Router?
The vacuum table of the G0932 has a footprint of 106-1/2" × 76".
What are the power requirements for this machine?
The G0932 requires 220V, 3-phase power with a minimum 30A circuit. The spindle and vacuum pump run independently on 3-phase.
What type of controller does this machine use?
The router uses the RichAuto DSP B18 handheld controller with a USB port and keypad. It allows saving up to nine work offsets and storing programs directly on the controller or via a thumb drive.
Does the G0932 include a rotary axis?
Yes. The machine features a rotary C-axis with a 7-7/8" swing over the bed and comes with a 3-jaw chuck for rotary machining.
What is the cutting area and Z-axis travel?
Cutting area: 51-3/16" × 98-7/16" × 7-7/8"
Z-axis travel: 7-7/8"
What are the spindle specifications?
The spindle is a 4 HP, 220V, 3-phase HSD air-cooled motor, capable of 0 – 18,000 RPM with variable speed.
Can the G0932 machine metals?
No. This machine is intended for wood, plastics, and other non-metallic materials. Using it on metal, glass, or stone is not recommended and voids the warranty.
What type of collets are included?
ER25 collets are included and compatible with 1/8", 4 mm, 6 mm, and 1/2" tools.
Does the machine include a vacuum table?
Yes. It has a phenolic T-track table with four independently controlled vacuum zones to securely hold workpieces.
What is the cutting accuracy of this router?
The G0932 has a cutting accuracy of ±0.002".
What is the maximum rapid speed for the axes?
X/Y axes: 1181 IPM
Z-axis: 400 IPM
Rotary C-axis: 472 IPM
Does the machine include a tool touch-off pad?
Yes. A tool touch-off pad is included for quickly setting the Z-axis height.
What is the maximum distance from the spindle to the table?
Maximum spindle-to-table distance is 7-7/8".
What type of motors drive the axes?
All axes use NEMA 34 hybrid stepper motors (brushless, permanent magnet) with a 1.8° step resolution. The rotary C-axis uses a gearbox reducer (20:1) for precision control.
Does the G0932 include automatic lubrication?
Yes. An automatic oiler system lubricates the guide rails and ballscrews.
What accessories are included?
3-Jaw Chuck with internal jaws
ER25 Collets: 1/8", 4 mm, 6 mm, 1/2"
ER25 Collet Wrench
Spoilboard Cutter (6 × 22 mm)
V-Groove Cutter (6 × 22 mm)
Engraving Bits (1/8", 19 pieces)
Open-End Wrench (27/30 mm)
Hex Wrenches (3, 4, 5, 6 mm)
Eight Hold-Down Clamps
Dust Shoe
USB-B Cable
50-Pin Cable
Two Hose Clamps (2")
Gasket Tube (68 ft.)
Proximity Switch (Spare)
What CAD/CAM software is compatible with the G0932?
The machine is compatible with VCarve, VCarve Pro, Aspire, Cut2D, Fusion360, Solidworks, Type3, Artcam, UG, Pro/E, MasterCAM, and Cimatron.
What is the assembly and setup time?
Approximately 4 hours.
What warranty does the G0932 come with?
1-year warranty covering parts and manufacturing defects. Consumables are not included.
Where is this machine manufactured?
The G0932 is made in China.
What is the approximate shipping weight?
The machine weighs approximately 3,087 lbs.