Will this machine cut out cabinet parts from a 4x8 sheet and drill all required holes?
Yes. The G0895 is fully capable of machining 4x8 sheets and drilling holes on the face of the panels. Depending on the panel’s height, holes can also be drilled along the edges. Sheets can be secured to the table using T-slot clamps or the included 6-zone vacuum table.
What software can I use for programming cabinet parts and drilling holes?
The G0895 is compatible with nearly all CAD/CAM and CNC cabinet software platforms, including Cabinet Vision, Mozaic, and Cabinet Pro. Grizzly also offers VCarve Pro, which is suitable for many applications, including cabinetry. Specialized cabinet-focused platforms may provide additional functionality.
Does this machine include a dust shoe?
The G0895 features a single dust port with a 4" diameter. A dust collection system will be required for optimal performance.
Does this machine come with a tool touch-off pad?
Yes. The G0895 includes a tool setter/touch-off pad.
Can this CNC router cut 2.5–3 mm carbon steel?
No. This machine is designed for wood products, laminate-covered wood products, and some plastics. It is not designed for cutting metal.
Can the G0895 be ordered in a single-phase version?
No. The G0895 requires 220V, 3-phase power and is not available in a single-phase configuration.
Can this machine cut drywall or cement board?
No. The G0895 is not designed for cutting drywall or cementitious materials. Attempting to do so will void the warranty.
What is the maximum cutting area?
The maximum cutting area is 51" × 98-1/2".
What is the maximum spindle speed?
The spindle motor operates at speeds up to 18,000 RPM.
What type of collet does the machine use?
The G0895 uses ER32 collets. Collets included are 1/4" and 1/2".
What is the maximum distance between the spindle and the table?
The maximum spindle-to-table distance is 11".
What kind of motor drives the spindle?
It has a 6 HP, air-cooled spindle motor.
How fast can the machine move along the axes?
X/Y axis rapid speed: 1500 IPM
Z axis rapid speed: 400 IPM
What power does the machine require?
Spindle: 220V, single-phase, 20A full load, minimum 30A circuit.
Vacuum pump: 220V, 3-phase, 21A full load, minimum 30A circuit.
Does it include a power cord and plug?
No. A power cord and plug are not included. Recommended: “S”-type, 3-wire, 12 AWG, 300 VAC cord with a NEMA L6-30 plug.
What accessories are included with the G0895?
Two-stage air vacuum pump (requires separate 220V, 3-phase power)
Collets: 1/4" and 1/2"
Open-end wrenches (30/32 mm) and ER32 collet wrench
T-Track hold-down clamps (6)
Vacuum table plugs
What is the assembly and setup time?
Approximate assembly and setup time is 3 hours.
What warranty does this machine come with?
The G0895 CNC Router includes a 1-year warranty.