Electrical & Motor

What are the power requirements?
110V, single-phase, 60 Hz, 3A full load, 15A minimum circuit.

Does it include a power cord and plug?
Yes. It comes with a 6 ft. 14 AWG cord and a 5-15 plug.

What type of motor does it have?
250W universal motor, 0–2500 RPM, single-phase, belt drive.

Does it have reverse?
Yes. Forward and reverse are available at all speeds.

Capacity & Operation

What is the swing over bed?
7".

What is the distance between centers?
12".

What is the maximum tool bit size?
5/16".

What is the swing over the cross slide?
2-1/8".

What is the maximum diameter you can turn full length?
2-1/8" diameter to stay above the cross slide.

Can you turn a radius on a 1" piece of stock?
Yes. The lathe can handle up to 7" length, making it easy to round a 1" piece.

Headstock & Spindle

What is the spindle bore?
0.78".

What is the spindle taper?
MT#3.

What are the spindle speeds?
Variable, 100–2500 RPM.

What type of spindle does it use?
Intrinsic back plate.

What is the spindle size?
3".

Tailstock

What is the tailstock taper?
MT#2.

What is the tailstock quill travel?
2-1/2".

Threading & Feeds

What threads can it cut?

• Inch: 18 threads, range 12–52 TPI.

• Metric: 10 threads, range 0.4–2.0 mm.

What is the longitudinal feed rate?
0.004 in./rev.

What is the leadscrew size?
5/8" diameter, 16 TPI, 17-3/4" length.

What is the DP of the change gears?
Depends on gear and pitch. Refer to page 26 of the manual.

Are the change gears metal or plastic?
Plastic.

Do you sell replacement gears?
Yes. Replacement gears are available from Product Support.

Chucks, Faceplate & Tooling

What chucks are included?
A 3" three-jaw chuck with external jaws.

What is the chuck capacity?
Up to 2-1/8" diameter to clear the cross slide.

Is there a 4-jaw chuck available?
Yes. The M1028 4-Jaw Chuck is compatible.

What chucks fit the P8688205 faceplate?
The faceplate is for irregular-shaped workpieces. A chuck requires machining an adapter plate.

Is there a quick change tool post available?
Yes. The T10167 Quick Change Tool Post is recommended.

What is the maximum tool bit size?
5/16".

Dimensions & Construction

What is the bed width?
3-1/4".

What is the faceplate size?
6-1/4".

What is the follow rest capacity?
1".

What materials is the lathe made from?
Cast iron base, headstock, and bed; epoxy finish; plastic end gears.

How much assembly time is required?
About 45 minutes.

Features & Accessories

What features are included?
Variable speed, forward/reverse, emergency stop, chip tray, backsplash guard, threading dial, inch/metric dials, and 16 TPI reversible leadscrew.

What accessories are included?
3" 3-jaw chuck with external jaws, 6-1/4" faceplate, change gears, four-position turret post, MT#2 dead center, steady rest, and wrenches.

Is a stand available?
Yes. The G7313 stand is optional.

Other Details

Where is it made?
China, in an ISO 9001 certified factory.

Is it NRTL certified?
No.

Where is the serial number located?
On the back right end of the bed way.

What is the warranty?
1 year.