Blade Questions
Does the G0803Z include a blade?
Yes. The G0803Z includes the G9170 62" x 1/4" x 6 TPI hook bandsaw blade.
How would you grade the blade this comes with?
The included blade is a general-purpose blade that we would rate as “good.” Many customers choose to upgrade to a blade that better matches their specific projects.
What is the largest blade this machine can use?
The G0803Z accommodates blades that are 62" in length and between 1/8" and 3/8" in width. It cannot use 1/2" or 3/4" blades.
Does this bandsaw accept a 59-1/2” blade?
No. The G0803Z requires a blade between 61-13/16" and 62-3/16" in length. A 59-1/2" blade will not fit.
Cutting Capabilities
Can this saw be used to cut metal?
No. The G0803Z is designed for cutting wood only.
Will this saw cut 3/16" steel bar?
No. This bandsaw is designed specifically for wood and is not suitable for cutting steel or other metals.
Can this machine use sanding belts?
No. The G0803Z is a bandsaw and is not designed to be converted into a sander.
Table & Fence Questions
How high is the table from the floor?
The floor-to-table height is 13".
How high is the table to the blade tension knob?
The distance from the table surface to the top of the blade tension knob is 16".
Does this saw come with a fence and miter gauge?
Yes. The G0803Z includes an extruded aluminum rip fence and a miter gauge.
What are the table dimensions and tilt range?
The cast-aluminum table measures 11-3/4" x 11-3/4", with a tilt range of 0–45° using a rack-and-pinion adjustment.
Electrical & Motor Questions
What power does the G0803Z require?
This machine runs on 120V, single-phase, 60 Hz power.
What is the full-load current rating?
The full-load current rating is 2.8 amps.
What size circuit is required?
A 15-amp circuit is recommended.
Does the machine come with a cord and plug?
Yes. It includes an 80-inch, 18 AWG power cord with a NEMA 5-15 plug already installed.
What type of motor does the G0803Z use?
The saw is powered by a 1/3 HP, 1725 RPM, single-phase ODP induction motor with belt drive.
Features & Construction
What are some of the key features of the G0803Z?
Class II laser sight for cut alignment
LED work light (3V, 0.5W)
Quick-release blade tension lever
Rack-and-pinion table tilt and guide post adjustment
Ball-bearing blade guides
Lower wheel brush to reduce dust buildup
Extruded aluminum fence with camlock handle
2" dust port with dust blower
What is the wheel size?
The aluminum wheels measure 9-5/16" in diameter and 5/8" in width.
How heavy-duty is the construction?
The table and trunnion are cast aluminum, while the base and frame are pre-formed steel. The wheels are aluminum with rubber tires, and the covers are steel.
Assembly, Warranty & Support
How long does assembly take?
Assembly and setup take about 30 minutes.
What is the warranty?
The G0803Z comes with a 1-year warranty.
Where is the G0803Z manufactured?
This machine is manufactured in Taiwan at an ISO 9001 certified factory, and it is NRTL certified.
Where is the serial number located?
The serial number can be found on the ID label attached to the saw.