⚙️ Functionality & Features
Can the spindle be locked?
No, the spindle cannot be locked on this model.
Does the lathe have reverse?
No, the T25920 only operates in forward rotation and does not include a reverse function.
Can I turn a bowl without adding extras?
Yes, the lathe includes a 3 1/4" faceplate for attaching bowl blanks.
Can I start turning right out of the box?
You’ll need to purchase chisels and gouges separately to begin turning.
What is the ram distance (tailstock travel)?
The tailstock spindle travel is 2 inches.
How do I eliminate play or wobble in the tailstock?
Check for uneven mating surfaces between the bed way and tailstock. If wobble persists, inspect the quill and tailstock housing, or contact Product Support.
📏 Dimensions & Capacity
What is the footprint with the bed extension?
- Overall dimensions: 60-3/4" x 12" x 17"
- Footprint: 52" x 8"
What is the spindle bore size?
The spindle bore is 11/16", which will accept a 0.375" diameter rod.
What are the size/weight limits for chucks and materials?
There’s no official weight limit, but avoid using chucks larger than 8" or heavy materials, as the lathe is powered by a 3/4 HP motor.
🔩 Accessories & Add-ons
Is there a self-centering 4-jaw chuck available?
Yes, any chuck with a 1" x 8 TPI thread will work. The H7605 is a compatible option.
Is there a 3-jaw chuck available?
Yes, you can use a 3-jaw chuck with a 1" x 8 TPI thread. Contact Product Support for recommendations.
Can I add a copy attachment if I use the T27327 bed extension?
No, we do not offer a compatible copy attachment for this lathe.
Where can I find a replacement headstock drive belt?
The correct part is PT25920053V2 Belt.