The G0899 saw features a left-tilting blade, precision-ground cast iron table and wings, and is made in Taiwan. It supports 110V or 220V power with appropriate breakers and conversion kits. The fence can be reversed but not used on both sides simultaneously. It includes dado inserts and supports push sticks but lacks a blade braking or safety stop system.
General Specifications
Q: Is there a compatible mobile base?
A: Yes, the D2057A, T28000, T31566, and T33447 bases are compatible.
Q: Does the G0899 have a left or right blade tilt?
A: The G0899 features a left-tilting blade.
Q: Is the blade swing right or left?
A: The blade tilts to the left.
Q: What is the flatness tolerance of the cast iron table?
A: The precision-ground cast iron table has a flatness tolerance of <+0.25mm (0.0098").
Q: Are the wings made of cast iron?
A: Yes, the wings are made of precision-ground cast iron, as indicated in the specifications.
Q: Where is the saw manufactured?
A: The G0899 is manufactured in Taiwan.
Electrical & Power
Q: Can the saw be wired to a single 20 amp breaker?
A: Yes, if operating on 110V, a single-pole 20 amp breaker is sufficient. For 220V, a two-pole 20 amp breaker is required.
Q: What do I need to convert to 220V?
A: Yes. You can purchase the P0899237 for conversion. For installation guidance, contact our Product Support team.
Q: What do I need to convert it to 230V?
A: You’ll need the P0899224X Circuit Breaker and a NEMA 6-15 plug. Refer to page 15 of the owner's manual for details.
Q: What are the advantages of running the saw on 230V?
A: While wattage remains the same, amp draw is split between two wires, allowing the motor to operate more efficiently and potentially extending its lifespan.
Fence & Table Features
Q: Does the fence have a micro-adjustment knob?
A: No. The G0899 uses small set screws for fine-tuning fence alignment.
Q: Can I move the fence extrusion to the other side?
A: Yes, the fence face can be reversed and positioned on the right-hand side.
Q: Can I add a right-side fence to use both sides simultaneously?
A: The fence can be used on either side of the blade, but not both at the same time.
Q: What is the length of the fence rail?
A: The fence rail measures 63 inches.
Q: Will a Biesemeyer 52" fence fit this saw?
A: Compatibility with third-party accessories like Biesemeyer fences is not guaranteed. Please consult the manufacturer directly.
Cutting Capabilities
Q: Is the saw suitable for ripping 1/2" x 3/4" strips?
A: Yes, the G0899 offers highly accurate fence alignment for consistent cuts. For even better performance, consider the G1023RL.
Q: Is the saw compatible with push sticks and guards?
A: Yes, the saw is push stick compatible with its guard system.
Q: Does it come with a dado plate?
A: Yes, the saw includes both a standard table insert and a dado table insert.
Q: What size dado set is recommended?
A: An 8" or 6" dado set is ideal. We recommend the T26696 8" Dado Set, which features a 5/8" bore compatible with the saw’s arbor.
Safety Features
Q: Does the saw have a blade braking system?
A: No, the G0899 does not include a braking system. The blade winds down naturally when power is turned off.
Q: Does it have a blade safety stop feature?
A: No. SawStop is currently the only brand offering patented blade safety stop technology.