⚠️ Important: This information only applies to the T32459Z and should not be referenced for the T32459. Please see HERE if you own the T32459 3/4 HP model.
General Specifications & Features
What is the warranty on this grinder?
The T32459Z comes with a one-year warranty, with optional extended coverage for three or five years.
What are the differences between the T32459Z and the original T32459 model?
Key upgrades include a 1 HP motor (up from 3/4 HP), a paddle switch with removable key replacing the twist-lock stop, a redesigned tension plate, cosmetic updates to the drive wheel cover, and an upgraded motor and control board to resolve previous issues.
What is the distance from the work table to the top of the platen?
The distance is 4 inches, providing space for bevel jigs while maintaining contact with the platen.
Belt & Grinding Capabilities
Will this grinder work with 2" x 48" belts?
Yes. While designed for 2" x 42" belts, it can also accommodate belts up to 48" in length.
Can this machine use 1" wide belts?
No. The T32459Z is only compatible with 2" wide belts.
Can the belt be adjusted side-to-side on the platen?
No. The platen does not support side-to-side adjustment.
Can the platen be removed?
Yes. The machine can be used without the platen.
Are other grinding attachments, like small wheels or knife guides, available?
No. Additional grinding attachments are not supported for this model.
Can the belt guards be removed for grinding curves on the wheels?
No. The guards are safety features and should not be removed. The aluminum rollers are not designed for grinding curves.
Build & Materials
What material is the frame made of?
The frame is constructed from steel.
What material are the pulleys made of?
The drive and idler wheels are made of aluminum.
Where is this grinder made?
The T32459Z is manufactured in China under Grizzly’s quality control.
Electrical & Operation
What are the electrical requirements for this machine?
110V, single-phase, 60 Hz, with a full-load current rating of 7.8A. Minimum circuit: 15A.
How long is the power cord and what type of plug is included?
The power cord is 72 inches long with a 5-15 plug.
What type of motor does it use?
Brushless DC motor, variable speed 100–3800 RPM, 1 HP.
What is the motor duty cycle?
100% duty cycle. A built-in temperature sensor shuts off the motor if it overheats.
Is the VFD sealed against metal dust?
Yes, the Variable Frequency Drive is sealed to protect against metal dust.
Is this machine available in 220V?
No. It is only available in 110V.
Setup & Use
How long does it take to assemble the machine?
Approximately 15 minutes. The machine ships mostly assembled.
Can the machine be mounted upside-down or from the ceiling?
No. Mounting upside-down or on the ceiling is not feasible and is strongly discouraged.
Can this machine be used with a water misting system?
No. Electrical components are not enclosed. Dipping workpieces for cooling is recommended instead.