Compatibility and Installation
The T32737 fits most 27" deep table saws. Some modifications (such as drilling and tapping holes or cutting fence rails) may be required.
It is not recommended for jobsite or contractor saws.
Confirmed Compatible Models
| Brand / Series | Model(s) | Notes |
|---|---|---|
| Grizzly | G0771Z 10" 2 HP Hybrid Table Saw | May require drilling and tapping |
| G0899 10" 2 HP Cabinet Table Saw | Rail does not need cutting | |
| G0962 10" 2 HP Open-Stand Hybrid Table Saw | Contact Product Support for mounting guidance | |
| G1023RL-Series 10" Cabinet Table Saws | Requires cutting left rail and removing extension table | |
| G0715P 10" Hybrid Table Saw | Drilling may be required | |
| G0690 10" Cabinet Table Saw | Drilling may be required | |
| Shop Fox | W1888 10" Hybrid Table Saw | Remove extension table, cut fence rails |
| W1677 10" Cabinet Saw | Requires drilling/tapping | |
| W1837 10" Hybrid Table Saw | Compatible as it has a 27" table | |
| SawStop | PCS Cabinet Table Saw | Compatible |
| CNS Contractor Table Saw | Compatible |
Not Compatible
| Brand / Model | Reason |
|---|---|
| Grizzly G0870 | Saw not heavy enough to support securely |
| Grizzly G0605X1 | Table depth does not align |
Possible but Not Confirmed
| Brand / Model | Notes |
|---|---|
| Grizzly G0478 | May fit; discontinued model, untested |
| Grizzly G0941 | May fit; drilling/tapping may be required |
| Older Craftsman (e.g., 113298844) | May fit; drilling/tapping may be required |
| Delta, Laguna, Baileigh, other brands | No specs available to confirm; contact manufacturer |
General Information
Q: Where is the sliding crosscut table manufactured?
A: It is manufactured in Taiwan.
Q: Can it be installed on the right side of the table?
A: No, it is not intended to be installed on the right side.
Q: Can it be removed when not in use?
A: No. It must be fully unbolted and uninstalled from the saw.
Q: Can it be used with a mobile base?
A: No compatible mobile base is available for this attachment.
Q: How long are the legs?
A: With the feet threaded in all the way, the legs measure 32-3/4" long.
Q: Can it be installed without removing the left wing?
A: It can be installed with the extension table left in place, but this setup is not recommended as it may reduce accuracy.