We know that mobility is key to maintaining an efficient and flexible workspace. That’s why we offer two lines of mobile bases, each designed to support specific machine sizes and weight capacities.
Our Grizzly Bear Crawl bases are the result of years of customer feedback and months of rigorous testing to achieve the perfect design. Our Shop Fox mobile bases have been trusted for over 20 years and remain a popular choice in shops across the country.
It’s important to choose a base rated for your machine to ensure it's properly supported. Some machines require an extension with the mobile base to increase the overall footprint, so make sure to take note of whether or not that is required with your model.
If the height is a concern, the mobile bases will raise the height of the tool approximately 3/4″ when not using a base plate.
We've listed the mobile base models we have available below, along with the minimum and maximum footprints of each. Clicking on the model number of the base will take you directly to the product page for that model. NOTE: The extensions for different brands are not cross-compatible.
All Mobile Base Models | |||
| Product Line | Base | Minimum Footprint | Maximum Footprint |
| Shop Fox | D2057A Shop Fox Heavy Duty | 20" x 20" | 29.5" x 29.5" |
| D2058A Shop Fox Super Heavy Duty | 18.5" x 24.5" | 28.5" x 33.5" | |
| D2246A Shop Fox Extension Bar Set | 44" | ||
| D2259A Shop Fox Extension Kit | 45.75" | ||
| D2260A Shop Fox Mini | 10.5" x 14.5" | 17.5" x 21.5" | |
| Bear Crawl | T28000 Bear Crawl | 19" x 21" | 29.5" x 29.5" |
| T31566 Bear Crawl Swivel | |||
| T33447 Bear Crawl Rough Surface | |||
| T28922 Bear Crawl Cub | 14" x 14" | 22.5" x 22.5" | |
| T28923 Papa Bear Crawl | 19" x 26" | 29.5" x 34.5" | |
| T31563 Build Your Own Bear Crawl | 600 Pounds | ||
| T28346 Bear Crawl Extension Rails | 44" | ||
| T28347 Bear Crawl Extension Kit | 18" (with modification) | 44" | |
| T32749 Bear Crawl Extension Kit - Rough Surface | |||
We've also listed the base needed for each machine below. If an extension is listed in the "required extension" column, you must ensure you purchase both the main base and the extension to accommodate the footprint of your machine.
Note: Some machines do not have mobile bases. This means they either do not have a base that fits, or the machine should be mounted directly to the floor instead.
Drill Presses: Most drill presses should be mounted directly to your shop floor. Some models can be used with a mobile base, but we strongly recommend mounting the drill press to a base plate on the mobile base. Any drill presses marked with an asterisk (*) in the chart will require a base plate.
Item |
Description |
Bear Crawl - Main |
Bear Crawl Required Extension |
Shop Fox - Main |
Shop Fox Required Extension |
G0438RL |
10" 1-1/2 HP 110V Contractor Left-Tilt Table Saw | T28923 |
|
D2058A |
|
G0438RLX |
10" 2 HP 220V Contractor Left-Tilt Table Saw | T28923 |
|
D2058A |
|
G0444 |
10" Table Saw 1-1/2 HP Single-Phase 110V | T28000 |
|
D2057A |
|
G0444Z |
10" Table Saw 2 HP Single-Phase 220V w/ Cast Wings | T28000 |
|
D2057A |
|
G0448 |
Heavy-Duty Mortiser With Stand | T28922 |
|
D2260A |
|
G0457 |
14" 2 HP Deluxe Bandsaw | T28000 |
|
D2058A |
|
G0458 |
18" 1-1/2 HP Single-Phase Open End Drum Sander | T28000 |
T28346 |
D2057A |
D2246A |
G0458Z |
18" 1-1/2 HP Open-End Drum Sander w/ VS Feed | T28000 |
T28346 |
D2057A |
D2246A |
G0477 |
15" Planer / Moulder | T28000 |
T28346 |
D2057A |
D2246A |
G0478 |
2 HP Hybrid Cabinet Saw | T28000 |
|
D2057A |
|
G0480 |
10" Spiral Cutterhead Jointer | T28000 |
T28346 |
D2058A |
D2246A |
G0488 |
Variable-Speed Moulder | T28923 |
|
D2058A |
|
G0489 |
3" x 79" 2-Wheel Metal Belt Grinder/Sander | T28922 |
|
D2260A |
|
G0495X |
8" x 83" Helical Cutterhead Jointer | None |
|
None |
|
G0500 |
8" x 75" Jointer w/ 4 Blade Cutterhead | T28922 |
T28346 |
D2260A |
D2246A |
G0506 |
18" Heavy-Duty Bandsaw - 2 HP | T28922 |
T28346 |
D2260A |
D2246A |
G0506X |
18" Single-Phase Super Heavy-Duty Bandsaw | T28922 |
T28346 |
D2260A |
D2246A |
G0506X3 |
18" 3-Phase Super Heavy-Duty Bandsaw | T28922 |
T28346 |
D2260A |
D2246A |
G0507 |
20" Heavy-Duty Bandsaw - 3 HP | T28922 |
T28346 |
D2260A |
D2246A |
G0510Z |
1 HP Shaper | T28922 |
|
D2260A |
|
G0510ZW |
1 HP Shaper | T28922 |
|
D2260A |
|
G0511 |
20" Heavy-Duty Bandsaw - 5 HP | T28922 |
T28346 |
D2260A |
D2246A |
G0512 |
6" x 80" Edge Sander w/ Wrap-Around Table | T28922 |
T28346 |
D2260A |
D2246A |
G0513 |
17" 2 HP Bandsaw | T28000 |
|
D2058A |
|
G0513ANV |
17" 2 HP Bandsaw - 35th Anniversary Edition | T28000 |
|
D2058A |
|
G0513P |
17" 2 HP Bandsaw, Polar Bear Series® | T28000 |
|
D2058A |
|
G0513X |
17" 2 HP Extreme Series Bandsaw | T28000 |
|
D2058A |
|
G0513X2 |
17" 2 HP Bandsaw w/ Cast-Iron Trunnion | T28000 |
|
D2058A |
|
G0513X2B |
17" 2 HP Extreme-Series Bandsaw w/ Cast-Iron Trunnion & Brake | T28000 |
|
D2058A |
|
G0513X2BF |
17" 2 HP Extreme-Series® Bandsaw with Cast-Iron Trunnion & Foot Brake | T28000 |
|
D2058A |
|
G0513X2F |
17" 2 HP Extreme-Series Bandsaw with Cast-Iron Trunnion & Foot Brake | T28000 |
|
D2058A |
|
G0514 |
19" Heavy-Duty Bandsaw - 2 HP | T28000 |
|
D2058A |
|
G0514X |
19" 3 HP Extreme Series Bandsaw | T28000 |
|
D2058A |
|
G0514X2 |
19" 3 HP Extreme Bandsaw | T28000 |
|
D2058A |
|
G0514X2B |
19" 3 HP Extreme-Series Bandsaw with Motor Brake | T28000 |
|
D2058A |
|
G0514X3 |
19" 3 HP 3-Phase Extreme Series Bandsaw | T28000 |
|
D2058A |
|
G0514XF |
19" 3 HP Extreme-Series Bandsaw with Foot Brake | T28000 |
|
D2058A |
|
G0515 |
5 HP 20" Planer | T28000 |
|
D2057A |
|
G0518 |
1 HP Drum / Flap Sander | T28000 |
T28346 |
D2057A |
D2246A |
G0526 |
6" Jointer | T28922 |
|
D2260A |
|
G0529 |
Oscillating Spindle / 12" Disc Sander | T28922 |
|
D2260A |
|
G0531B |
21" 5 HP Industrial Bandsaw with Brake | T28000 |
|
D2058A |
|
G0540 |
Single Spindle Horizontal Boring Machine | T28923 |
|
D2058A |
|
G0543 |
8" x 75" Spiral Cutterhead Jointer | T28922 |
T28346 |
D2260A |
D2246A |
G0544 |
20" 5 HP Pro Spiral Cutterhead Planer | T28000 |
|
D2057A |
|
G0546 |
20" Planer w/ Spiral Cutterhead | T28000 |
|
D2057A |
|
G0550 |
15" Planer w/ Open Stand | T28000 |
|
D2057A |
|
G0551 |
15" Planer w/ Closed Stand | T28000 |
|
D2057A |
|
G0552 |
Planer Moulder | T28000 |
|
D2057A |
|
G0555 |
The Classic 14" Bandsaw | T28922 |
PT28000005 (qty 2) |
None |
|
G0555LA35 |
14" 1 HP Deluxe Bandsaw - 35th Anniversary Edition | T28922 |
PT28000005 (qty 2) |
None |
|
G0555LANV |
14" Deluxe Bandsaw - Anniversary Edition | T28922 |
PT28000005 (qty 2) |
None |
|
G0555LX |
14" 1 HP Deluxe Bandsaw | T28922 |
PT28000005 (qty 2) |
None |
|
G0555P |
14" 1 HP Bandsaw, Polar Bear Series | T28922 |
PT28000005 (qty 2) |
None |
|
G0555X |
14" 1-1/2 HP Extreme Series Bandsaw | T28922 |
|
D2260A |
|
G0555XH |
14" 1-3/4 HP Extreme Series Resaw Bandsaw | T28922 |
|
D2260A |
|
G0560 |
Meat Saw w/ Sliding Table | T28922 |
|
D2260A |
|
G0563 |
6" x 89" Oscillating Edge Sander | T28000 |
|
D2057A |
|
G0564 |
6" x 108" Oscillating Edge Sander | T28923 |
|
D2058A |
|
G0566 |
21" Industrial Bandsaw, Single-Phase | T28923 |
|
D2058A |
|
G0566B |
21" Super Heavy-Duty 3 HP Bandsaw with Motor Brake | T28923 |
|
D2058A |
|
G0568 |
24" 5 HP Industrial Bandsaw | T28000 |
T28346 |
D2058A |
D2246A |
G0569 |
24" 7-1/2 HP 3-Phase Industrial Bandsaw | T28000 |
T28346 |
D2058A |
D2246A |
G0570 |
14" Industrial Bandsaw 1-1/2 HP | T28000 |
T28346 |
D2260A |
D2246A |
G0574 |
Guitar Fretboard Radiusing Sander | T28922 |
|
D2260A |
D2246A |
G0575 |
1-1/2 HP 10" Table Saw | T28000 |
|
D2057A |
|
G0576 |
2 HP 10" Table Saw | T28000 |
|
D2057A |
|
G0580 |
14" Bandsaw 3/4 HP | T28000 |
|
D2057A |
|
G0586 |
8" Jointer w/2 HP Motor | T28922 |
T28346 |
D2260A |
D2246A |
G0593 |
8" Jointer w/ Spiral Cutterhead | T28922 |
T28346 |
D2260A |
D2246A |
G0608X |
7-1/2 HP 3-Phase Extreme Series Tilting Arbor Shaper | T28000 |
T28346 |
D2057A |
D2246A |
G0610 |
11-1/4" Dovetail Machine | T28000 |
|
D2057A |
|
G0611X |
16-1/2" Extreme Series Dovetail Machine | T28000 |
T28346 |
D2057A |
D2246A |
G0621X |
13-1/2" 1-1/4 HP 3-Phase Vertical Wood/Metal Bandsaw | T28922 |
T28346 |
D2260A |
D2246A |
G0633 |
12" Jointer / Planer | T28000 |
|
D2057A |
|
G0634 |
12" Jointer / Planer w/ Spiral Cutterhead | T28000 |
|
D2057A |
|
G0634X |
12" 5 HP Planer/Jointer with V-Helical Cutterhead | T28000 |
|
D2057A |
|
G0634XP |
12" 5 HP Planer/Jointer with Helical Cutterhead-Polar Bear Series | T28000 |
|
D2057A |
|
G0634Z |
12" 5 HP Planer/Jointer with Spiral Cutterhead (Replaces G0634) | T28000 |
|
D2057A |
|
G0636X |
17" 5 HP Ultimate Bandsaw | T28000 |
|
D2058A |
|
G0636XB |
17" 5 HP 220V Extreme-Series Bandsaw with Brake | T28000 |
|
D2058A |
|
G0640X |
17" 2 HP Metal/Wood Bandsaw w/ Inverter Motor | T28000 |
|
D2058A |
|
G0642 |
15 Bit Line Boring Machine | T28000 |
|
D2057A |
|
G0643 |
21 Bit Line Boring Machine | T28000 |
T28346 |
D2057A |
D2246A |
G0651 |
10" 3 HP 220V Cabinet Table Saw | T28000 |
T28347 (qty 2) |
D2057A |
D2259A (qty 2) |
G0659 |
9" x 14" Vertical Metal-Cutting Bandsaw | T28000 |
T28346 |
D2057A |
D2246A |
G0660X |
16" Jointer / Planer | T28000 |
|
D2057A |
|
G0661 |
10" 2 HP Contractor Style Table Saw with Riving Knife | T28000 |
|
D2057A |
|
G0668 |
20" 2 HP Vertical Metal-Cutting Bandsaw | T28000 |
T28346 |
D2058A |
D2246A |
G0675 |
10" 2-1/2 HP Jointer/Planer Combo | T28000 |
|
D2057A |
|
G0690 |
10" 3 HP 220V Cabinet Table Saw with Riving Knife | T28000 |
|
D2057A |
|
G0691 |
10" 3 HP 220V Cabinet Table Saw with Long Rails & Riving Knife | T28000 |
T28347 |
D2057A |
D2259A |
G0696X |
12" 5 HP 220V Extreme Series® Table Saw | T28000 |
|
D2057A |
|
G0697X |
12" 7-1/2 HP 3-Phase Extreme Series® Table Saw | T28000 |
|
D2057A |
|
G0701 |
19" 5 HP Ultimate Bandsaw | T28923 |
|
D2058A |
|
G0713 |
10" 1-3/4 HP Left-Tilting Contractor Style Table Saw with Riving Knife | T28000 |
|
D2057A |
|
G0715P |
10" Hybrid Table Saw with Riving Knife, Polar Bear Series | T28000 |
|
D2057A |
|
G0719 |
15" Disc Sander with Stand | T28000 |
|
D2057A |
|
G0732 |
Contractor Style Saw | T28000 |
|
D2057A |
|
G0736 |
15" Variable-Speed Metal Cutting Bandsaw | T28923 |
|
D2058A |
|
G0737 |
18" Variable-Speed Metal Cutting Bandsaw | T28923 |
|
D2058A |
|
| 22" Heavy-Duty Gearhead Drill Press w/Cross-Slide Table | None |
|
None |
|
|
| 27-1/2" Heavy-Duty Gearhead Drill Press | None |
|
None |
|
|
G0771 |
10" Hybrid Table Saw | T28000 |
|
D2057A |
|
G0771Z |
10" 2 HP 120V Hybrid Table Saw with T-Shaped Fence | T28000 |
|
D2057A |
|
G0775 |
20" Heavy-Duty Disc Sander | T28923 |
|
D2058A |
|
G0778 |
14" 1-3/4 HP Deluxe Bandsaw | T28000 |
|
D2058A |
|
| 23-3/8" Heavy-Duty Floor Model Gearhead Drill Press* |
|
|
|||
| 15" Heavy-Duty Floor Drill Press |
|
|
|||
| 27-1/2" Heavy-Duty Gearhead Drill Press | None |
|
None |
|
|
| 14" Floor Drill Press with Laser and DRO* |
|
|
|||
G0806 |
14" 1-1/2 HP Variable-Speed Vertical Metal-Cutting Bandsaw | T28923 |
|
D2058A |
|
G0807 |
18" 2 HP Variable-Speed Vertical Metal-Cutting Bandsaw | T28923 |
|
D2260A |
D2246A |
| 20-3/4" Gearhead Drill Press w/Cross-Slide Table | None |
|
None |
|
|
| 16" Drill Press w/Cross-Slide Table & Power Feed |
|
|
|||
G0815 |
15" 3 HP Heavy-Duty Planer | T28000 |
|
D2057A |
|
G0817 |
14" Super HD 2 HP Resaw Bandsaw with Foot Brake | T28000 |
|
D2058A |
|
| 15" Drill Press w/Auto Downfeed |
|
|
|||
G0833P |
10" 2 HP 230V Hybrid Table Saw with Riving Knife, Polar Bear Series | T28000 |
|
D2057A |
|
G0834 |
12" X 84" Jointer w/ Spiral Cutterhead | T28000 |
T28346 |
|
|
G0839 |
6" X 80" Edge Sander | T28922 |
T28346 |
D2260A |
D2246A |
G0839P |
6" x 79" Edge Sander - Polar Bear Series | T28922 |
T28346 |
D2260A |
D2246A |
G0840 |
Mortising Machine with XY Table and Stand | T28922 |
|
D2260A |
|
G0846 |
Horizontal Slot Mortiser | T28000 |
|
D2057A |
|
G0890 |
15" 3 HP Fixed-Table Planer | T28922 |
T28346 |
D2260A |
D2246A |
G0891 |
15" 3 HP Fixed-Table Planer w/Helical Cutterhead | T28922 |
T28346 |
D2260A |
D2246A |
G0899 |
10" Hybrid Table Saw With Riving Knife | T28000 |
|
D2057A |
|
G0900 |
5 HP Deluxe Spindle Shaper | T28000 |
|
D2057A |
|
G0920 |
22" Single Drum Sander | T28923 |
|
D2058A |
|
G0936 |
20" Vertical Oscillating Belt Sander | T28922 |
T28346 |
D2260A |
D2246A |
G0941 |
10" 3 HP 220V Cabinet Table Saw | T28000 |
|
D2057A |
|
G1014Z |
6" x 48" Belt/9" Disc Z Series Combo Sander | T28000 |
|
D2057A |
|
G1014ZX |
6" x 48" Belt/9" Disc Combo Sander with Cabinet Stand | T28922 |
|
D2260A |
|
G1018 |
8" x 65" Super Heavy-Duty Jointer | T28922 |
T28346 |
D2260A |
D2246A |
G1018HW |
8" x 65" Super Jointer w/ Handwheels | T28922 |
T28346 |
D2260A |
D2246A |
G1019 |
14" Bandsaw | T28922 |
|
D2260A |
|
G1021X |
15" Extreme Series Spiral Cutterhead Planer | T28000 |
|
D2057A |
|
G1021X2 |
15" 3 HP Extreme Series Planer w/ Helical Cutterhead | T28000 |
|
D2057A |
|
G1021Z |
15" 3 HP Planer w/ Cabinet Stand | T28000 |
|
D2057A |
|
G1023RL |
10" 3 HP 240V Cabinet Table Saw | T28000 |
|
D2057A |
|
G1023RLW |
10" 3 HP 240V Cabinet Table Saw with Built-in Router Table | T28000 |
|
D2057A |
|
G1023RLWX |
10" 5 HP 240V Cabinet Table Saw with Built-in Router Table | T28000 |
|
D2057A |
|
G1023RLX |
10" 3 HP 240V Cabinet Table Saw with 7' Rails | T28000 |
T28347 |
D2057A |
D2259A |
G1023RLX5 |
10" 5 HP 240V Cabinet Table Saw with 7' Rails | T28000 |
T28347 |
D2057A |
D2259A |
G1023S |
10" Table Saw 3 HP Single-Phase 220V | T28000 |
|
D2057A |
|
G1023S110 |
10" Table Saw 2 HP Single-Phase 110V | T28000 |
|
D2057A |
|
G1023SL |
10" Table Saw 3 HP Single-Phase 220V Left-Tilt | T28000 |
|
D2057A |
|
G1023SLW |
10" Left-Tilt Cabinet Table Saw | T28000 |
|
D2057A |
|
G1023SLWX |
10" 5 HP Single-Phase Left Tilt Cabinet Saw | T28000 |
|
D2057A |
|
G1023SLWX3 |
10" 5 HP 3-Phase Left Tilt Cabinet Saw | T28000 |
|
D2057A |
|
G1023SLX |
10" Table Saw 3 HP Single-Phase 220V Left-Tilt w/ 7' Rails | T28000 |
T28347 |
D2057A |
D2259A |
G1023Z |
10" Deluxe Heavy Duty-3 HP Table Saw | T28000 |
|
D2057A |
|
G1023ZX |
Table Saw 10" Deluxe HD 5 HP | T28000 |
|
D2057A |
|
G1023ZX3 |
10" Table Saw 5 HP 3-Phase Z-Series | T28000 |
|
D2057A |
|
G1026 |
3 HP Shaper | T28000 |
|
D2057A |
|
G1033 |
20" 3 HP Planer | T28000 |
|
D2057A |
|
G1033X |
20" 5 HP Helical Cutterhead Planer | T28000 |
|
D2057A |
|
G1033Z |
20" 5 HP Planer | T28000 |
|
D2057A |
|
G1033ZX |
20" Planer, 5 HP with Spiral Cutterhead | T28000 |
|
D2057A |
|
G1035 |
1-1/2 HP Shaper | T28922 |
|
D2260A |
|
G1035P |
1-1/2 HP Shaper, Polar Bear Series | T28922 |
|
D2260A |
|
G1037Z |
13" Planer/Moulder | T28000 |
|
D2057A |
|
G1066R |
24" 5 HP Drum Sander | T28923 |
|
D2057A |
D2246A |
G1066Z |
24" 5 HP Drum Sander w/ VS | T28923 |
|
D2057A |
D2246A |
G1071 |
1 HP Oscillating Spindle Sander | T28922 |
|
D2260A |
|
G1073 |
16" Bandsaw (Best on the Market!) | T28000 |
|
D2057A |
|
G1073Z |
16" Bandsaw (Best on the Market) - Cabinet Stand Version | T28000 |
|
D2057A |
|
G1079 |
16" Drum Sander | T28923 |
|
D2058A |
|
G1079R |
16" 2 HP Drum Sander w/ Rubber Conveyor | T28923 |
|
D2058A |
|
G1140 |
6" x 80" Floor Model Edge Sander | T28922 |
|
D2260A |
|
G1148 |
Heavy-Duty 15" Bandsaw | T28922 |
T28346 |
D2260A |
D2246A |
G1182HW |
6" x 47" Jointer w/ Handwheels | T28922 |
|
D2260A |
|
G1182Z |
6" x 47" Super Heavy-Duty Jointer - Z Series | T28922 |
|
D2260A |
|
G1182ZHW |
6" x 47" Super Jointer w/ Handwheels - Z Series | T28922 |
|
D2260A |
|
G1182ZX |
6" x 47" Heavy-Duty Jointer | T28922 |
|
D2260A |
|
G1182ZXHW |
6" x 47" Heavy-Duty Jointer w/ Handwheels | T28922 |
|
D2260A |
|
G3619 |
24" Resaw Bandsaw 5 HP Single-Phase | T28922 |
T28346 |
D2260A |
D2246A |
G3620 |
24" Resaw Bandsaw 7-1/2 HP 3-Phase | T28922 |
T28346 |
D2260A |
D2246A |
G4185 |
Horizontal Boring Machine | T28922 |
T28346 |
D2260A |
D2246A |
G4790 |
Combination Sander 6' x 48" Belt 10" Disc | T28922 |
|
D2260A |
|
G4792 |
2 HP Shaper | T28000 |
|
D2057A |
|
G4814 |
INDUSTRIAL HOLLOW CHISEL MORTISING MACHINE | T28922 |
|
D2260A |
|
G5850Z |
20" 5 HP Professional Planer | T28000 |
|
D2057A |
|
G5912Z |
5 HP Professional Spindle Shaper - Z Series | T28000 |
|
D2057A |
|
G5913Z |
5 HP Professional Tilting Spindle Shaper - Z Series | T28000 |
|
D2057A |
|
G5959 |
12" Table Saw Pro-Cabinet-Style 5 HP Single-Phase 220V | T28000 |
|
D2057A |
|
G5959Z |
12" Table Saw Pro-Cabinet-Style 5 HP Single-Phase 220V Left-Tilt | T28000 |
|
D2057A |
|
G651 |
10" 3 HP 220V Heavy Duty Cabinet Table Saw | T28000 |
|
None |
|
G7209 |
14" Table Saw Pro-Cabinet-Style 5 HP Single-Phase 220V | T28923 |
|
D2058A |
|
G7210 |
14" Table Saw Pro-Cabinet-Style 7-1/2 HP 3-Phase | T28923 |
|
D2058A |
|
G7214Z |
7-1/2 HP 3-Phase Spindle Shaper | T28000 |
|
D2057A |
|
G7215Z |
7-1/2 HP 3-Phase Tilting Spindle Shaper | T28000 |
|
D2057A |
|
| 14" Heavy-Duty Floor Drill Press* |
|
|
|||
| 34" Floor Radial Drill Press* |
|
|
|||
G8030 |
Overarm High Speed Router | T28000 |
|
D2057A |
|
G8144Z |
12" 1 HP VS Vertical Metal-Cutting Bandsaw with Inverter | T28922 |
T28346 |
D2260A |
D2246A |
G8145Z |
14-1/8" 1-1/2 HP VS Vertical Metal-Cutting Bandsaw with Inverter | T28922 |
T28346 |
D2260A |
D2246A |
G8146 |
15-3/4" Vertical Metal-Cutting Bandsaw | T28000 |
T28346 |
D2058A |
D2246A |
G8146Z |
15-3/4" 2 HP VS Vertical Metal-Cutting Bandsaw with Inverter | T28000 |
T28346 |
D2057A |
D2246A |
G8621 |
5 HP Sliding Table Shaper | T28000 |
|
D2057A |
|
G8622 |
5 HP Sliding Table Shaper with Tilting Spindle | T28000 |
|
D2057A |
|
G9859 |
The Ultimate 8" Jointer | T28922 |
T28346 |
D2260A |
D2246A |
G9859Z |
8" Z Series Jointer w/ Spiral Cutterhead | T28922 |
T28346 |
D2260A |
D2246A |
G9922 |
Oscillating Spindle Sander | T28000 |
|
D2057A |
|
G9957 |
12" Table Saw Pro-Cabinet-Style 7-1/2 HP 3-Phase | T28000 |
|
D2057A |
|
G9966 |
26-1/2" Resaw Bandsaw 7-1/2 HP 3-Phase | T28000 |
T28346 |
D2058A |
D2246A |
| 45" Radial Drill Press | None |
|
None |
|
|
G9981 |
5 HP Overarm Router 2 Speed, 3-Phase | T28000 |
T28346 |
D2057A |
D2246A |
G9982 |
Oscillating Edge Sander | T28923 |
|
D2058A |
|
G9984 |
9" x 138-1/2" Industrial Oscillating Edge Sander | T28000 |
T28346 |
D2058A |
D2246A |
G9985 |
9" x 138-1/2" 3-Phase Industrial Oscillating Edge Sander | T28000 |
T28346 |
D2058A |
D2246A |
H6246 |
Heavy-Duty Meat Saw w/ Sliding Table | T28922 |
|
D2260A |
|
| 20" Floor Drill Press* |
|
|
|||
SB1040 |
18" Vertical Bandsaw - 1PH | T28923 |
|
D2260A |
D2246A |
SB1041 |
18" Vertical Bandsaw - 3PH | T28923 |
|
D2260A |
D2246A |
SB1080 |
16" 3 HP Heavy-Duty Bandsaw | T28923 |
|
D2058A |
|
SB1091 |
8" Parallelogram Jointer | None |
|
None |
|
SB1093 |
6" x 48" Belt / 12" Disc Combination Sander | T28000 |
|
D2057A |
|
SB1097 |
6" x 108" VS Oscillating Edge Sander | T28923 |
|
D2058A |
|
SB1102 |
26" 5 HP Single-Phase Drum Sander | T28000 |
|
D2057A |
|
SB1108 |
15" Planer with Helical Cutterhead | T28000 |
|
D2057A |
|
SB1109 |
20" Planer with Helical Cutterhead | T28000 |
|
D2057A |
|
SB1110 |
10" 3 HP 220V Table Saw | T28000 |
|
D2057A |
|
SB1111 |
10" 3 HP 220V Cabinet Table Saw w/extension Rails | T28000 |
T28347 (qty 2) |
D2057A |
D2259A (qty 2) |
SB1115 |
21" Variable-Speed Gearhead Drill Press |
|
|
||
| 21" Variable-Speed Gearhead Drill Press w/Cross-Slide Table | None |
|
None |
|
|
SB1117 |
9" x 138-1/2" Oscillating Edge Sander | T28000 |
T28346 |
D2058A |
D2246A |
SB1119 |
3 HP Single-Phase Spindle Shaper | T28923 |
|
D2058A |
|
SB1120 |
5 HP 3-Phase Spindle Shaper | T28923 |
|
D2058A |
|
| 19-1/2" Variable Speed Drill Press |
|
|
|||
ST1006 |
8" Jointer with Adjustable Beds | None |
|
None |
|
ST1007 |
15" Planer with Cast-Iron Wings | T28000 |
|
D2057A |
|
T26418 |
Floor-Model Oscillating Sander | T28000 |
T28346 |
D2260A |
D2246A |
T32304 |
10" 3/4 HP Meat Cutting Bandsaw | T28922 |
|
D2260A |
|
| 14" Floor Drill Press with LED Light & Laser Guide* |
|
|
|||
| 17" Floor Drill Press w/LED Light & Laser Guide | T28922 |
|
None |
|
|
| 20" Floor Drill Press w/LED Light & Laser Guide | T28922 |
|
None |
|
|
| 15" Floor Variable-Speed Drill Press* |
|
|
|||
| 17" Floor Variable-Speed Drill Press* |
|
|
|||
| 20" Floor Variable-Speed Tapping Drill Press |
|
|
|||
| 34" Floor Radial Drill Press* |
|
|
|||
W1674 |
2 HP Shaper | T28000 |
|
D2057A |
|
W1676 |
6" Belt / 10" Disc Combo Sander | T28922 |
|
D2260A |
|
W1678 |
26" 5 HP Drum Sander | T28000 |
T28346 |
D2057A |
D2246A |
| 17" Floor Model Drill Press* |
|
|
|||
W1686 |
1 HP Oscillating Spindle Sander | T28922 |
|
D2260A |
|
W1688 |
6" x 80" Edge Sander | T28922 |
T28346 |
D2260A |
D2246A |
W1701 |
1-1/2 HP Shaper | T28922 |
|
D2260A |
|
W1702 |
Shop Fox 3 HP Shaper | T28000 |
|
D2057A |
|
W1706 |
1 HP 14" Bandsaw | T28922 |
|
D2260A |
|
W1712 |
6" x 48" Belt/12" Disc Combo Sander | T28922 |
|
D2260A |
|
W1717 |
1/3 HP Horizontal/Vertical Sander | T28922 |
T28346 |
D2260A |
D2246A |
W1729 |
19" 2 HP Bandsaw | T28922 |
T28346 |
D2260A |
D2246A |
W1730 |
Oscillating Edge Sander | T28000 |
|
D2057A |
|
W1743 |
Heavy Duty Mortiser | T28922 |
|
D2260A |
|
W1763 |
2-1/2 HP Shaper | T28000 |
|
D2057A |
|
W1770 |
21" 5 HP Bandsaw | T28923 |
|
D2058A |
|
W1807 |
7-1/2 HP Heavy Duty Shaper | T28923 |
|
D2058A |
|
W1819 |
10" 3 HP Cabinet Table Saw with Riving knife | T28000 |
|
D2057A |
|
W1820 |
10" 3 HP Cabinet Table Saw with Riving Knife and Long Rails | T28000 |
T28347 |
D2057A |
D2259A |
W1825 |
19" 3 HP Heavy Duty Bandsaw | T28922 |
T28346 |
D2260A |
D2246A |
W1827 |
5 HP Shaper | T28000 |
|
D2057A |
|
W1837 |
10" 2 HP Open Stand Hybrid Table Saw | T28000 |
|
D2057A |
|
W1842 |
13" Planer/Moulder | T28000 |
|
D2057A |
|
W1845 |
6" x 108" Oscillating Edge Sander | T28923 |
|
D2058A |
|
| 13-1/4" Oscillating Flooor Drill Press* |
|
|
|||
W1849 |
14" 2 HP Resaw Bandsaw | T28922 |
T28346 |
D2260A |
D2246A |
W1851 |
2 HP 10" Hybrid Cabinet Table Saw with Extension Table | T28000 |
|
D2057A |
|
W1854 |
18" 1-1/2 HP Open-End Drum Sander w/ VS Feed | T28000 |
T28346 |
D2057A |
D2246A |
W1862 |
15" 3 HP Planer | T28000 |
|
D2057A |
|
W1863 |
15" 3 HP Planer with Helical Cutterhead | T28000 |
|
D2057A |
|
W1864 |
20" 5 HP Planer | T28000 |
|
D2057A |
|
W1865 |
20" 5 HP Planer with Helical Cutterhead | T28000 |
|
D2057A |
|
W1873 |
15'' 3 HP Fixed-Table Planer | T28000 |
|
D2057A |
|
W1874 |
15'' 3 HP Fixed-Table Planer w/Helical Cutterhead | T28000 |
|
D2057A |
|
W1888 |
10" Cabinet Table Saw | T28922 |
|
D2260A |
|