Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.

1. What is the difference between G0656 and G0656W?

The G0656X has a 3 HP motor and is wired for a single-phase, 220V, 15A power supply circuit.
The G0656XW also has a 3 HP motor but is wired for a single-phase, 220V, 12A power supply circuit.
Additionally, the G0656X cutterhead speed is 4800 RPM, while the G0656XW cutterhead speed is 5350 RPM.
Aside from these differences and appearance, the two models are identical.
View G0656W on Grizzly.com

2. What are the electrical requirements for the G0656W?

• Power Requirement: 240V, single-phase, 60 Hz
• Full-Load Current: 12A
• Minimum Circuit Size: 20A
• Connection Type: Cord & Plug
• Power Cord: 6 ft, 12 AWG
• Plug Included: Yes (Type 6-20)

3. What type of motor does the G0656W have?

The G0656W is powered by a 3 HP TEFC capacitor-start induction motor running at 3450 RPM, providing plenty of power for jointing hardwoods.

4. What type of cutterhead does the G0656W use?

It features a spiral cutterhead with 40 indexable carbide inserts arranged in 4 rows for smooth, quiet cutting and reduced tear-out.

5. What is the maximum cutting capacity?

• Maximum Cutting Width: 8"
• Maximum Depth of Cut: 1/8" per pass
• Maximum Rabbeting Depth: 1/2"

6. What are the minimum workpiece dimensions?

• Minimum Length: 8"
• Minimum Thickness: 1/2"

7. How fast does the cutterhead spin?

The cutterhead speed is 5350 RPM, producing 21,400 cuts per minute for a smooth finish.

8. What type of fence does the G0656W have?

The jointer includes a cast iron fence measuring 35" long × 5" high, with positive stops at 45°, 90°, and 135° for bevel and chamfer cuts.

9. Does the G0656W have a built-in mobile base?

Yes, it includes a built-in mobile base for easy movement around your shop.

10. What size dust port does the G0656W have?

The G0656W includes a 4-inch dust port for efficient dust collection.
Shop Dust Collection Accessories

Key Specifications

• Jointer Size: 8"
• Motor: 3 HP, 240V, single-phase, 12A
• Cutterhead Type: Spiral with 40 indexable carbide inserts
• Cutterhead Speed: 5350 RPM
• Cuts Per Minute: 21,400
• Table Size: 73" L × 9-3/8" W
• Fence Size: 35" L × 5" H
• Dust Port: 4"
• Mobile Base: Built-in