Important Disclaimer: This article references a model that is no longer in production. Please note that the availability of replacement parts or discussed accessories is not guaranteed.

What accessories come with the lathe? This lathe comes with a live center, spur center, 12" tool rest, and a 6" faceplate.

Does this machine come with any chisels? No, it does not. However, Grizzly offers a wide variety of turning chisels. We offer the 5-piece G8963 and the 8-piece G8945.  

What do I need to put a drill chuck in the tailstock? You can use any size drill chuck you prefer on this machine. The tailstock has a Morse taper #2, so all you need is an MT #2 arbor with a Jacobs® taper that matches the socket in the drill chuck. Grizzly carries a full selection of arbors and chucks. A good combination for this lathe is the G1434 arbor and the G8224 ½” chuck.  

Does the headstock have positive stops at 90° and 45°? Yes. This lathe has positive stops at 0°, 45°, 90°, 135°, and 180°. The headstock can also be locked in between these stops.  

Is a safety shield available for this machine like the G1495? No.

What is the thread size on the main spindle? 1” - 8 right-hand.

Is there a motor bigger than the 1/2 HP that comes with the machine? Due to a special shaft and a special mount, changing the motor would not be feasible.

Can I purchase the lathe without a stand? No, the lathe is sold as a complete unit.

Can this lathe be fitted with 3 and 4 jaw chucks? Yes. We offer the G1194 3-jaw chuck and the G1082 4-jaw chuck. Be sure to also order the adaptor insert, G3163.  

Is it hard to change speeds? No, it's not hard at all. Just turn on the machine, turn the speed selector to the desired speed, and you’re done.